|
|
Register | All Photos | FAQ | Members List | Calendar | ShopStream (Radio/TV) | Search | Today's Posts | Mark Forums Read |
The Sheath/Holster Makers Forum This is the place to discuss all forms of sheath and holster making. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Advice needed - making patterns, stamping, burning leather
I haven't been working with leather for very long. I have only finished six projects so far, but I am learning more with each one. I am lacking in good techniques to add designs to my projects.
I was wondering if anybody is burning designs into leather, possibly using a wood burner? Or, would this damage the leather? I have experimented with stamping the leather, and have had mixed results. I have used a basketweave stamp, and like how it looks but I need better technique. I am not sure of the proper way to stamp a sheath that was wet-formed around the knife? If the leather is stamped before the wet forming, much of the stamp design is lost once the leather is stretched around the knife. If I wet form the leather to the shape of the knife first, the leather is then hard and shaped like the knife . . . making it difficult to stamp because it is not flat. I was also concerned that re-wetting a sheath for stamping, which has already been shaped to the knife will take away from the shape. The wet-forming is easier for me, because I can get it to fit tightly, sew it up and then trim it right around the stiching. I realize that it may be better to cut out a pattern first, then stamp the leather before sewing the sheath (not wet-forming at all). I do not have a good method to figure out right where the stitching will be and where the stamps should be before it is put together. I usually try to figure the pattern out by wrapping paper around the knife first in order to simulate how the leather will sit. Then trace the paper onto the leather. I find it hard to make a nice shapped snug fitting sheath this way. This is why I was wondering about the possibility of burning designs into a wet-formed sheath that is already sewn. I would love any advice about techniques to make patterns, stamping techniques, or possibly burning designs. Thanks. Last edited by GJL; 11-12-2011 at 06:15 AM. |
#2
|
|||
|
|||
GJL---if you are serious in your pursuit of bettering your leather working skills, here is the best advice you will ever receive to achieve that objective. There are currently tutorial DVD's on the construction of knife sheaths by two of the best in the trade. Chuck Burrows (aka Wild Rose on the forums) and Paul Long (aka Sheathmaker on the forums) have produced the best info that it has been my pleasure to view in MANY years. Their information is pertinent, to the point, readily understandable, and will ease the pain of self learning which can take years. This is not a sales pitch, but a statement from one that has been there and done that----Sandy Morrissey
__________________ Martin (Sandy) Morrissey Master Leather Craftsman 1105 Stephens Road Blairsville, GA 30512 706-379-1621 |
#3
|
|||
|
|||
Sandy,
How, or where can I get these videos? Thanks. |
#4
|
|||
|
|||
I'm not Sandy but I know that Jantz has Chuck Burrows' DVD. You can also check with USA Knife Maker Supply, they may have both and don't forget Amazon. Go to their DVD listing and search for knife sheaths. Also let me echo Sandy's advice. Watching the process of sheath making is much better than reading a book or reinventing the wheel on your own by just trying to skull bone it out. By the way, Chuck show a much easier method of laying out the pattern for a sheath. It's also got me around a few problems that I have run into making sheaths.
Doug __________________ If you're not making mistakes then you're not trying hard enough Last edited by Doug Lester; 11-15-2011 at 01:59 PM. |
#5
|
||||
|
||||
Thanks for the props, Sandy.
GJL. the information on my DVDs is at the bottom of the post in my sig line. Paul __________________ Basic Pouch Sheaths and Advanced Blade sheaths DVDs are available at www.chriscrawfordknives.com ***New third DVD available at the same web site*** Paul Long-- 108 Briarwood Ln. W.-- Kerrville, Texas 78028-- Ph. 830 367 5536--- pfl@cebridge.net |
#6
|
||||
|
||||
Quote:
__________________ God bless Texas! Now let's secede!! |
Tags |
forge, knife, leather, post, sheath, supply |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Advice needed | Doug Lester | Fit & Finish | 1 | 09-27-2010 07:39 PM |
Getting Started Advice Needed | Wade Holloway | Georgia Knifemaker's Guild | 16 | 08-01-2007 08:29 AM |
Advice and help needed | Tarl_cabot | Fine Embellishment | 6 | 02-05-2005 09:24 PM |
Stamping distorts leather | ABN | The Sheath/Holster Makers Forum | 19 | 11-19-2004 11:29 AM |
burning on leather | cortez | The Sheath/Holster Makers Forum | 1 | 04-09-2004 02:38 PM |