MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Knife Making Discussions > Fine Embellishment

Fine Embellishment Everything from hand engraving and scrimshaw to filework and carving. The fine art end of the knifemaker's craft.

Reply
 
Thread Tools Display Modes
  #1  
Old 02-18-2006, 06:32 PM
steve ellsworth steve ellsworth is offline
Banned
 
Join Date: May 2003
Location: Highlands Ranch CO
Posts: 76
DVD and Tape production

Sounds like everyone wants to do a little video work.

In hindsight, taking a look at my monstor video system it makes more sense to give you all a few links to look at for toys that are less money and will probably do just what you want them to as far as capturing and editing video on your home systems. I say this since I doubt that any of you will need the higher crap like I have which will go to TV station/broadcast quality out put. Most will be doing scope or bench work segments assembling them and going no farther than a master and second generation copies. For this you do not need to spend more than a couple of hundred bucks or maybe less.

As everyone has a different comptuer with different capabilities it is best to deal with toys that are not too demanding on your system, Ie those that do most of the work out side of the computer and rack the finished product into your system with a minimal amount of head ache. These devices get tinto the computer thru a usb 2 or firewire port. USB 1 will not cut it. If you dont have one you will need to find one that suits your price range and fits into your system. Stay with PCI or higher. If you are running an old ISA system its time to upgrade.

Drive space is a major issue doing video. In fact its best if you just plan on dedicating a computer to pure video work because using other software and all the crap an operating system can throw into your memory loading down your cpu will make your system puke and your video will not be stable. In general you neeed to devote one drive to operating system, video/audio editing software, one drive for capture, one or more for storage (these can be rewritable DVD disks or something similar) one drive for audio and one for rendering the final output to. These drives dont have to be that huge. Considering you will be doing short runs Ie 1 hr or so you can get by with a 9 gig for the audio 36 gigs each for the capture and rendering 40 gig (and this can be a standard drive) for the os. Your drives should be spinning at 10K rpm. Dont buy the slower ones.

Drives come in a wide variety of capabilities. You will need something rated for video (AV) work. Scusi or sata. Standard cheapie drives may work for VHS quality productions but even then they tend to skip and get erratic. I prefer scusi because i can daisy chain 250 drives together with no problems along with all my other toys. Check out pricewatch for buys on these items. Dealers will eat you up.

Software is a matter of choice but most gadgets you wll find on the following links generally include all you will need to make a fair production without having to pull your hair out learning a major player like avidd or adobe (which is what I use). 99 percent of the software programs will allow you to watch your clips and edit in real time. Once everything is cool you tell the progem to render and then you go to bed and hope the power doesnt fail during the night. Some allow a preiw view dump to TV so you can watch the production. You can cheat here and tie in a recoder of some kind to capture the preview so you can skip the rendering process.

Video editing can take up a lot of real estate on the desktop so a large monitor is necessary. I have twin 19"s on mine so I can do multiple things at one time or span the time line so i can see whats coming up on the tape.Editing gets to be a pain on a small monitor because you invariable have to zoom into the frame level to make your cuts and transitions. Keeping in mind there are 30 frames per second on VHS and 25 on DVD. Searching through frames can drive you blind.

You will probably need a microphone so you can get the point across. It doesnt atake much. A good mic can be had at radio shack for twenty bucks. Try to get a cardiod (directional) that way you can talk across the mic rather than into it and people wont hear you breating. Most software will give you the option of capturing audio video or both.
Freeware is out there that handles this well. Even windoze has audio capture built in.
Make sure to shut off all the noisy stuff when you do your narration. Buzzes are distracting. A good audio booth can be made from old egg cartons staples up on the walls. Too live a room (hard walss) makes it sound wierd. Where you narrate depends on your voice quality. before I was trained for broadcast work I used to narrate in the shower. It's balenced and kicks your voice up. If you sing in the shower you know what i mean. Another trick is to put the micin the bottom of a wastebasket. This will give you a nice effect. Of course you can accomplish a lot of these tricks with software but it takes too long to learn.

Always, plan your script out first. Write down what you want to get across, refine it. Narrate it to disk. Clean up the goobers. Mixin a little music. Then edit in the video over the top. Trying to do it any other way is not fun.

When you shoot pay attention to your lighting. Household tube light go green, bulbs go red. Spring for some daylight bulbs on the warm side. You can use the out put from your scope cams but you may have to do some color filtration on the video to make it look normal. This is not too hard but it adds to the rendering time. time is money.

Special effects are memory eating time consuming critters, so use them sparingly. If you are going to make mistakes, this is where they will show up.

Nothing is more boring than watching a video tape that takes forever to get through or is belabored with people talking while performinga process - there are quite a few tapes on the market like that. I know you have seen them. Makes no sense to watch a graver run thru steel for ten minutes.

Depending on your computers video card you may not have to buy a capture rig. Alot of the higher end graphics cardshave video in and out. Look through your manual. It may not have been something you paid attention to when you bought the system.
Check out the web sites of the software that comes with your toy to see if you really like the layout and capabilities. I have about 60 different programs. I still go back to adobe for most of my work. Ulead makes some pretty afir stuff. Alot of the others have had time to improve. Some of them just crash.

You need to learn to operate the bios setups on your system to shut off stuff that drains cpu. While XPis nice windoze 2000 pro is still the best for video work. It generally runs a year before it dies so make dvd back ups of the whole install once you get you system working. That way when it does die you can get it back in a fewminutes rather than days.



Re making the investment and making money.
After years in the business I can tell you this. People are going to pirate and copy your work and give it to their friends. So be prepared. Even with copy protected DVDS there is software out there being sold that will go through your dvd like crap through a goose and strip it clean. Copy protection costs money. VHS tapes with copy protection area better deal. BAsicall what they do is weakin the sysnc signal which times the playback motors. Make a copy and whoppie the motors go nuts. Unfortuantely there is a large movement in process to eliminate tapes form the retail market. Disks are cheaper to produce, the way of technology.


If you need help holler. If you want to produce something and you think its over your head we can talk. Much can be learned on the net.

This is just one of many toy factories but they have good prices and major brands
take a look at the various options and have fun.

For web delivery take a long look at flash delivery it rocks.

Looking back on all the years i spent doingthis stuff I can honestly say I would have been better off being an engraver!!!!
http://www.tigerdirect.com/applicati...asp?CatId=1423
Steve
Reply With Quote
  #2  
Old 02-18-2006, 07:24 PM
steve ellsworth steve ellsworth is offline
Banned
 
Join Date: May 2003
Location: Highlands Ranch CO
Posts: 76
more stuff re video work

Pulled this article
the only thing we seem to disagree on is the 10k drive spin rate but the links are good and 7.2k drives work well too. They just do things alittle slower.
Anyway enjoy. Most of this related to external drives as most people dont have large tower systems which can hold multiple drives which generate all the heat that these babies do.
Anyway enjoy....


If you will be doing a lot of video editing, you will want a
Firewire connection, and plenty of HD room. I'd recommend purchasing
the largest external drive your budget will allow. Another option,
should your budget allow, is to purchase several, as they are
hot-swappable with Windows XP. Most of this type of drive also comes
with a USB connection, which is slower, but still a good option. The
hard drive speed you would want would be 7200 RPM, almost standard
today in well known brands.

"Most computers today are shipping with 30 to 80 GB (and bigger)
hard drives. Although spacious for most tasks, these drives can
quickly become full when digital video enters the picture. Why? Well,
think of it like this: every frame of video is like a JPEG photo you
might get off your digital camera. There are usually 30 frames per
second of video on a computer, so if you have a 5-minute video, that's
like having 9000 JPEG photos on your hard drive! An hour of DV quality
video will take up around 13 GB, and that's just for the
capturing?you'll need that much space again if you're going to be
outputting a final project without editing too much of the video out.
So, for an hour of video you'll need 26 GB minimum. But hard drives
are about more than just size, so we'll also delve into why
performance is important."


Factors to Look for in a Hard Drive
====================================
When buying a hard drive, there are three important factors to
consider: capacity, rotation speed, and cache. All these elements play
a role in how fast you can open, edit, and save your digital video
with Windows Movie Maker 2.
?

Capacity is straightforward?the higher the number, the more storage
space you have. I should mention here that you'll never get the full
amount of space promised on the box. The reason is boring and
technical, but as a rule of thumb, for every 100 GB your hard drive
says it has, you'll get 93 GB of usable space.
?

Rotation speed?the number of times that a hard drive spins around per
minute (much like a tire on a car): 5400 revolutions per minute (RPM)
is standard, and 7200 RPM is what you'll see on high-performance
drives consumer drives. On servers the drives can spin as fast as
15,000 RPM, but those drives are very expensive. For video work, and
indeed for a faster performing computer in general, 7200 RPM is the
best choice. That's not to say that if you have a 5400 RPM hard drive
you can't work with digital video, but if you're buying a new hard
drive I strongly recommend a 7200 RPM drive. Once you start opening
and saving gigabytes of data, you'll appreciate the extra speed boost.
?

Cache size?cache on a hard drive is much like RAM on your computer.
The cache acts as a temporary storage location for the data, and since
the cache can respond much more quickly than the hard drive itself
(nanoseconds instead of milliseconds), the more cache a drive has the
better overall performance it will give. Most hard drives have 2 or 4
MB of cache?the Special Edition Western Digital drives and Matrox
DiamondMax Plus 9 both have 8 MB of cache, which makes them top
performers. I only buy drives with 8 MB of cache for this reason. "
http://www.microsoft.com/windowsxp/u...gust11_hd.mspx


Seagate:
========
"There's a USB-only model, but I recommend the one that also has
FireWire connectivity and comes with a Pushbutton Backup feature that
uses CMS's BounceBack software. The device is hot-swappable and
surprisingly quiet. Withs an 8 MB cache and 7200 RPM operating speed,
it's also fast enough for DV video editing without tears."
http://www.seagate.com/cda/newsinfo/...3,2640,00.html

This site tested Seagate againt Maxtor external drives, and both
excelled in different areas:
"What's really interesting about these results is the difference in
FireWire and USB 2.0 tests for the Maxtor drive. USB 2.0 has a higher
theoretical limit than FireWire, but the results of the OneTouch belie
that. On the other hand, the Seagate drive offers ever-so-slightly
better results for USB 2.0.

The likely cause of these differences is the respective controllers
built into the drive electronics. As we've seen in the past,
differences in FireWire or USB controller can affect overall
throughput. What is consistent here, however, is the substantially
higher CPU utilization when running USB 2.0 ? not a big surprise,
given USB's host-based nature. "
http://www.extremetech.com/article2/...1375601,00.asp

"What's interesting ? and can't be demonstrated in the read-intensive
Winbench 99 tests ? is the write performance of the Seagate drive.
It's also interesting to see that, in the case of the Seagate drive,
the 1394 performance outstrips the USB 2.0 result by a significant
margin ? but the Maxtor offers better results running under USB 2.0."
http://www.extremetech.com/article2/...1375602,00.asp

Seagate review
http://www.extremetech.com/article2/...1375605,00.asp

Maxtor won the back-up test
http://www.extremetech.com/article2/...1375603,00.asp



Maxtor:
=======
Maxtor has a highly rated external hard drive, that come in various
hard drive sizes. (I have one and it performs flawlessly and quickly).
http://pcworld.pricegrabber.com/sear...sterid=9711266

Maxtor Review
http://www.extremetech.com/article2/...1375604,00.asp



ProMax
======

ProMax has several sizes of external, firewire (much faster than USB)
http://www.promax.com/Products/Cat/Storage

"FireWire disk drives offer hot swappable, easy to transport, high
performance data storage. No termination or disk ID's to worry about.
These new disk drives are compatible with computers with FireWire
ports and are excellent for digital video and graphics applications.
Now for the first time its easy to add an unlimited amount of storage
capacity to a G3, G4, G5 iMacDV, iBook, PowerBook, PC, or Laptop
Computer native FireWire 400 or CardBus FireWire port.

Model - ATA-100
FireWire Interface - 400 Mbit
USB Interface - USB 2.0
Rotational Speed - 7,200 RPM
Length 9.5 in
Height 7.5 in
Width 2.5 in

Features:
* External System With A/C Power Supply
* Oxford ATA to FireWire Bridge Technology
* Ships With a 6 pin to 6 pin FireWire Cable
* Daisy Chain Cabinets For Added Capacity
* Warranty: 1 Year - 72 Hour RMA Repair

The Firewire drives were tested and approved on the following systems
for video and storage:
* G3, G4, G5 Macintosh and Windows Based Computers
* PowerBooks, iBooks, and Laptops
* iMacDV and iMacDV-SE With FireWire 400 Ports
* Final Cut Pro, Premiere, and Avid Xpress DV
* PC systems Windows 2000 and newer"
http://www.promax.com/Products/Detail/27465


Other external hard drives:
===========================
Here are some others:
http://pcworld.pricegrabber.com/sear...id%5B%5D=109/p
opup7_attr_id%5B%5D=381/popup7_attr_id%5B%5D=381/sortby=popular-/start=25


If money is no object, these drives look nice, and the first one has
built in back up capability (redundancy):
http://www.videoguys.com/gtech.html


I hope this has helped you decide on an external hard drive! If any
part of my answer is unclear, please request an Answer Clarification
before you rate. This will allow me to assist you further if possible.

Sincerely, Crabcakes

Search Terms
=============
external + firewire + hard drive + video editing
best external drive + video editing


mille887-ga rated this answer: and gave an additional tip of: $1.00
Good answer. Very comprehensive.



Comments Log in to add a comment

Subject: Re: external hard drive for video editing
From: crabcakes-ga on 14 Nov 2005 22:13 PST
Thank you for the 5 stars and the tip! Glad to be of help!
Regards, Crabcakes

Subject: Re: external hard drive for video editing
From: seekneutrality-ga on 07 Dec 2005 20:07 PST
The answer given above is true... for around three or four years ago,
in terms of computer hardware technology. 5400 rpm is standard?
Perhaps for laptops. 7200 is the standard rpm for the consumer desktop
market. And as far as cache size is concerned, 8 mb is the standard
these days- *especially* for tasks like video editing. 16 mb would be
a much better choice in that respect.

Then there is the matter of the question itself. Most external HDDs
are going to run much slower when compared the average performance of
internal HDDs- the issue of the bus bandwidth capacity bottleneck is
the gremlin there since many people still use regular PCI cards with
USB 2.0 or Firewire 1394a ports to connect their external HDDs. The
*best* option for someone who feels they must use an external HDD for
video editing tasks would be to have an external SATA I or II drive
connected to either an after-market SATA card or by running it through
an open slot hole in the rear of the box straight to the motherboard's
own SATA ports.

Subject: Re: external hard drive for video editing
From: abductedmind-ga on 13 Dec 2005 10:26 PST
seekneutrality-ga, Do you have a specific recommendation as far as
purchasing a SATA solution? and how can I really tell if an interface
will truly achieve the 480mbps promised?

I have done some research in anticipation of purchasing an external
hard drive for video editing. I nearly purchased a drive similar to
what crabcakes recommends and realized at the last minute it would
have been a mistake. seekneutrality-ga is right on the money about the
notion of a bottle neck problem. His solution sounds awkward but it is
about 4x faster than some of crabcakes recommendations. Be careful of
external enclosure hard drives, they may be much slower because they
have an ATA interface for example.

Actually I can't quite make heads or tails of the occational external
HD that claims of 400mps and another that is an external encloser with
a 400mps connection, but admits that the HD interface runs at
100mbps.The problem lies in the "ATA100" interface. That is a 100mbps
transfer rate, not even close to the 480 mbps that you can potentially
achieve with USB 2.0.

Another clarification needed is that a USB 2.0 port (most common
version of USB in new drives) is 480mbps and firewire 1.0 is 400mbps
(most common version of firewire in new drives that support firewire).
So generally, a USB port will in fact be faster than a firewire port.
I believe that Firewire 2.0 about 2/3 faster than USB 2.0 but much
less common.

Subject: Re: external hard drive for video editing
From: matthey-ga on 15 Dec 2005 08:11 PST
I am editing a lot on my laptop with external disc 250gb WD 7200 8mb.
The problem is yes: ata100 external enclouser. I am using USB 2.0.
So I want to buy a new USB SATA enclouser for my new 300GB 7200 8 SATA
disc. They say that the data transmition will be 150 mbps insted of
100 with ATA 100.
You think that this will help?

Subject: Re: external hard drive for video editing
From: abductedmind-ga on 15 Jan 2006 09:55 PST
abductedMind above, was me earlier. What I said was partially
ignorant. My father found a document that explained the difference
between SATA and ATA and what speeds they actually achieve. A very
good external HD will achieve up to 150mbps only for what is in the
cache. In longer bursts 60mbps is more realistic, because internally
the HD can access in formation slower than it can send it up the
pipeline.

Here is the PDF: http://www.seagate.com/docs/pdf/whitepaper/TP-539.pdf

In conclution the answer is: I don't know. hehe. I am still completely
frustrated with the lack of information available in this area.

What I do know is that SATA is definetly better than ATA. I've seen
something about SATA2 as well. I don't know what that is.

I hope people continue to build on this google answer. I suggest that
we post what we buy and the results that we get.

Subject: Re: external hard drive for video editing
From: boosh71-ga on 26 Jan 2006 18:13 PST
I too am looking to buyy an external hard drive. I plan on buying an
internal hard drive along with an enclosure to put it in. I looking
at the "ROSEWILL RX30-U2FAB Aluminum 3.5" USB+IEEE1394 Firewire800
External Enclosure" at newegg.com and either a "250GB Western Digital
16MB cache" or a "320GB Western Digital 8MB cache." I understand that
16MB cache is better than 8, but I have acouple questions...

Since this is going to be an external drive set up connected by FW800,
does the bigger cache make a difference?

Also, the 250GB Western digital is a SATA drive, and the 320GB is
ATA100. From what I understand the SATA is better but I don't know if
it matters what enclosure you buy with it and if it even makes a
difference for external drives.

thanks for any input

here is some information on the drives:

Western Digital Caviar SE16 WD2500KS 250GB 7200 RPM SATA 3.0Gb/s Hard Drive - OEM

Average Latency: 4.2ms
Average Seek Time: 8.9ms
Average Write Time: 10.9ms
Cache: 16MB
Features: Cool operating temperature Whisper quiet
Form Factor: 3.5"
Manufacturer Warranty: 3 Years
Model #: WD2500KS

Western Digital Caviar SE WD3200JB 320GB 7200 RPM IDE Ultra ATA100
Hard Drive - OEM

Average Latency: 4.2ms
Average Seek Time: 8.9ms
Average Write Time: 10.9ms
Cache: 8MB
Features: Cool-running Quiet Data Protection Enhancements
Form Factor: 3.5"
Manufacturer Warranty: 3 Years
Model #: WD3200JB

URL for enclosure:

http://www.rosewill.com/product/prod...x?productId=81

Subject: Re: external hard drive for video editing
From: abductedmind-ga on 16 Feb 2006 18:55 PST
Ah, ha! I think I have found a saticfactory easy answer. Buy "LaCie".
They are not expensive but they are the best for video editing in
their price range. If you go to their website they actually post
"sustained datarate" which is the most important statistic for video
editing. Most other makers/sellers of external HDs don't give you that
information.

Western digital seems to be the fastest in general for the least
amount of money. LaCie is what the pro's use, AND they are not
expensive.



--------------------------------------------------------------------------------

Important Disclaimer: Answers and comments provided on Google Answers are general information, and are not intended to substitute for informed professional medical, psychiatric, psychological, tax, legal, investment, accounting, or other professional advice. Google does not endorse, and expressly disclaims liability for any product, manufacturer, distributor, service or service provider mentioned or any opinion expressed in answers or comments. Please read carefully the Google Answers Terms of Service.

If you feel that you have found inappropriate content, please let us know by emailing us at answers-editors@google.com with the question ID listed above. Thank you.

Search Google Answers for all questions answered questions unanswered questions
Reply With Quote
  #3  
Old 02-20-2006, 09:00 PM
gravertom's Avatar
gravertom gravertom is offline
Steel Addict
 
Join Date: Jun 2002
Posts: 242
Wow Steve! Thanks!

Great stuff. If I ever do anyhting, I will try to make it not boring...

Tom
Reply With Quote
  #4  
Old 02-20-2006, 09:25 PM
Ray Cover Jr Ray Cover Jr is offline
Master
 
Join Date: Apr 2004
Posts: 926
Thanks Steve,

I just printed all this out and kept in my "projects" pile/folder/heap of crap on my desk.

Ray


__________________
Ray Cover
Fine Art Engraving School
rcoverengraving.com

ray@rcoverengraving.com
Reply With Quote
  #5  
Old 02-21-2006, 12:11 PM
J. Barraclough J. Barraclough is offline
Steel Addict
 
Join Date: Jan 2006
Location: Gardena,Los Angeles California
Posts: 236
Ray, I printed it too....... and it sounds as if we have the same filing system!
Mine sounds like yours, pile it on the desk until you can't move!!!!!
I hope things go well for you with your school plans.
John.
Reply With Quote
  #6  
Old 02-21-2006, 12:16 PM
J. Barraclough J. Barraclough is offline
Steel Addict
 
Join Date: Jan 2006
Location: Gardena,Los Angeles California
Posts: 236
Sorry, forgot to say thank you to Steve for all this terrific advise.
You sure know your computer/video/editing stuff, Steve.
Thank you for sharing it with us.
John
Reply With Quote
  #7  
Old 02-21-2006, 09:05 PM
Ray Cover Jr Ray Cover Jr is offline
Master
 
Join Date: Apr 2004
Posts: 926
Guys,

I just won another one of these Flex cams with mic on ebay for $9.99 new in teh box with software and plug and play card for my computer. The software was for a Windows 95 system but so what. To get a camera worth several hundred dollars for $9.99 is still a heck of a deal. If you guys want one there are more on there.

Ray


__________________
Ray Cover
Fine Art Engraving School
rcoverengraving.com

ray@rcoverengraving.com
Reply With Quote
  #8  
Old 03-05-2006, 08:47 AM
steve ellsworth steve ellsworth is offline
Banned
 
Join Date: May 2003
Location: Highlands Ranch CO
Posts: 76
flex cams where are you finding the low prices

i guess you cleaned them out Ray
all i have been able to find are a couple without power supplies
the rest are running over 250 bucks
whats your secret

did you get it all hooked up and working yet
steve
Reply With Quote
  #9  
Old 03-05-2006, 05:55 PM
Ray Cover Jr Ray Cover Jr is offline
Master
 
Join Date: Apr 2004
Posts: 926
I must have. I guess the good Lord knew i neede them and knew I needed a break.

I just won a neat little Portass lathe on there made in Shefeild England in 1926. It looks like it has been sitting in cosmoline for the past 80 years. I kid you not it looks brand new. Winnng bid.... $143 US. plus $48 to ship it here from Holland (6-8 week ground).

I'm going to put it on my bench for shaping punches and such.

I just seem to do well on ebay with stuff like that.

I don't really have any secrets I just run accross a real deal from time to time.

Ray


__________________
Ray Cover
Fine Art Engraving School
rcoverengraving.com

ray@rcoverengraving.com
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 01:47 PM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved