|
|
Knife Kits Forum New to the art of knife making? Learn to make awesome knives, using advanced hands-on training inside. From KnifeKits.com. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
KNIFEKITS DDR3 CONTEST. Value $400.00. Pick a number and win!
Hi Folks!
As you know the long awaited DDR3 is very close to delivery time. This knife is larger than the ddr1. This knife is a mid sized knife that is built to be either a high end dresser, or a very sweet tactical utility. The knife is designed with thicker liner, excellent blade material, and totally exquisite function. One of the knives is more tactical while the other is more high style. The blades are interchangeable too so you can mix and match to your desire. These knives will have factory made backspines also. Here is the scoop. We are opening the pre-reserve on the DDR3 kits now. You can win a great package from Knifekits.com worth $400.00 when you pre-reserve your DDR3 knives. We thought about this for a while and came up with a package of our high quality kit building items for this contest. This package will set you up with great equipment to build your kits with. Heres how it works. After you pre-reserve with your DDR3 knives you come back to this thread. You then post a number between 0 and 500 that is not spoken for. You can post one entry number per post only. You can post one number for each knife you pre-reserve also. So if you buy three knives we need three separate posts with a number in each. NOTE: We will not accept emails or phone calls. The post MUST be done in this thread and posted only after you pre-reserve your kits. Please include your name and the number you chose in the post. Please make sure the number you chose has not been taken. We have sent the winning number to select folks who can verify the number. The number was sent before this contest was started to make sure this is done in a fair and unbiased manner. If the winning number is not picked, the number closest that is lower than the winning number will be the winner. Moderators on this forum are not eligible for this contest. Dealers are ineligible also. Pre-reserve link to knifekits.com for the DDR3 below. http://www.knifekits.com/store/s-pag..._ddr3-main.htm Here is what you will win. #1. We will give you the kits that you ordered on pre-reserve free. #2 A Kalamazoo SN-1 grinder. #3 A Pro Visor for file working and detail work. #4 A 5 Pack of our new deep pocket carry clips. #5 A set of our Pro Torx screwdriver #6 and #8 size to build your kits with. #6 A file working swivel vice. #7 A set of our large file working files with the handle included. These are great for file work! #8 Our new Half Life product for illumination. Here are the pictures of the prizes for the contest. Once again the value is $400.00 plus depending on how many knifes you order. Kalamazoo grinder. Our new fold over clips. Half life illumination kit. File set for file working. A set of #6 and #8 pro torx #######. Our pro swivel vice. Our opti visor with for fine detail work. This is a very nice set of tools and items for building kits. Please post your numbers to win! Last edited by Darrel Ralph; 08-09-2003 at 02:04 AM. |
#2
|
|||
|
|||
Hi Guys
I cant believe I'm first on this:-) pretty sue there will be a mad rush later though. my first number is 221 Tom Lauder |
#3
|
|||
|
|||
My second number is 308
Tom Lauder |
#4
|
|||
|
|||
First number is 498
Tim |
#5
|
|||
|
|||
second number is 4
Tim |
#6
|
|||
|
|||
Third number is 79
Tim |
#7
|
|||
|
|||
Fourth number is 257
Tim |
#8
|
|||
|
|||
Last pick is 321
Tim |
#9
|
|||
|
|||
Contest
My first number is: 188
Bill |
#10
|
|||
|
|||
Contest
My second number is: 389
Bill |
#11
|
|||
|
|||
Contest
That stuff would sure look good at my place!! This is getting very, very, addictive!!
Bill |
#12
|
|||
|
|||
My number is 173
Mike Rust |
#13
|
||||
|
||||
Number Post
2 Kenneth Kinsey
3 justice 4 Mail4Tim 6 Randy Havard 7 Nobody 9 Bill Miller 18 Randy Havard 19 tdc 22 Armando Garcia 23 Hunter 27 Jette Bybjerg 32 Justus Tiemann 33 justice 35 Randy Havard 36 Kenneth Kinsey 38 Mick 43 gandalf23 46 Andre Leriche 51 MRK 58 Toto 68 Michael Bales 70 justice 71 Ned Fig 79 Mail4Tim 84 eastlakeventure 95 Jakedog 99 Justus Tiemann 101 Mick 103 Randy Havard 111 BillF 117 SharpShooter 119 SharpShooter 123 Baturn 131 Steve Owen 137 tdc 140 Justus Tiemann 141 PaulD 145 CigarMan 154 Tbonz 158 Toto 172 Buster J 173 Mike Rust 188 bgmills 189 hunterjntx 197 Kinny Howell 215 tdc 220 justice 221 Tom Lauder 222 HankL 225 Kenneth Kinsey 235 Norman Pritchard 242 BillF 253 Brad Bowman 257 Mail4Tim 258 Toto 264 Bill Miller 265 ckeech 290 Bill Miller 293 gandalf23 298 neo733c 300 Randy Havard 303 Wapiti 305 S1N 308 Tom Lauder 311 Silverborn 312 Kenneth Kinsey 316 3/16th's 321 Mail4Tim 327 S1N 333 Xer0 334 Xer0 345 Justus Tiemann 346 Baturn 352 Ropes4u 357 MashBill 358 Toto 362 Russ Kay 366 Bill Miller 375 Nobody 377 tdc 379 eastlakeventure 389 bgmills 398 Tbonz 399 Code3 401 Ned Fig 405 Justus Tiemann 409 SKH 410 Mick 411 Djaniv 418 Kenneth Kinsey 426 Fritzers 428 Toshmo 429 ckeech 441 tdc 444 HankL 458 Toto 468 Bill Miller 469 Buster J 498 Mail4Tim __________________ Alex Whetsell [======]~~~~~~~> Atlantavirtual.com Atlanta NOC |
#14
|
|||
|
|||
# 68 please.
michael bales |
#15
|
||||
|
||||
What a fabulous idea, paving the way for some incredible work that can be accomplished with this setup. Way to go, Darrel and Alex!
That Kalamazoo grinder is my most used tool on the majority of the kits I've done, and it's good quality! Feelin' lucky??! Coop __________________ Jim Cooper - Capturing the Artistry and Significance of Handmade Knives ?? New website improvement for 2010 - Over 5000 images searchable by maker's name! ?? |
Tags |
blade, knife, knife making, knives |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|