MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Tool Time

Tool Time Let's talk shop. Equipment, Tips & Tricks, Safety issues - Post it here.

Reply
 
Thread Tools Display Modes
  #1  
Old 01-10-2019, 01:59 AM
M&J's Avatar
M&J M&J is offline
Skilled
 
Join Date: Dec 2004
Location: So. Cal
Posts: 375
Task lighting?

What are some of you using for your locallized area lighting set-up's?

I have a few swing arm lamps with 5500K LED bulbs and one 18" fluorescent but I'm looking to find some other options for better illumination. Would like to see what some of you have setup at your work area/benches.


__________________
Mike
Reply With Quote
  #2  
Old 01-11-2019, 08:45 AM
Ed Caffrey's Avatar
Ed Caffrey Ed Caffrey is offline
Super Moderator
 
Join Date: Jun 2002
Location: Great Falls, Montana, USA
Posts: 4,254
Send a message via AIM to Ed Caffrey Send a message via Yahoo to Ed Caffrey
Lighting types are very important in your shop.....particularly if you attend knife shows around the country. The reason? Different type of light show different things.... incandescent, florescent, halogen, sodium vapor, etc.

For example, if you have a shop with mostly the old style, yellowish colored florescent lighting, build you knives there, and then display them in a venue that hosts halogen or sodium vapor lights..... it'll be UGLY! I learned it the hard way.
I have various type of light bulbs in the shop, so I can examine my work BEFORE going into those types of lighting.

As for my shop(s)..... last year I tore out all the old 8" florescent fixtures/bulbs, and purchased/installed 6500K LED strip lights..... https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

When it comes to benches and machines, I have "swing arm" lights all over the place. Each is equipped with a 6000-6500K LED "Daylight" bulb. I never pay retail for any of the swing arm lights..... usually in the summer months you can stumble into a yard sale, and find them for just a couple of bucks each.


__________________




Caffreyknives@gmail.com
"Nobody cares what you know.....until they know you care."
See me at table 2Q at the Blade Show!
Reply With Quote
  #3  
Old 01-11-2019, 03:35 PM
M&J's Avatar
M&J M&J is offline
Skilled
 
Join Date: Dec 2004
Location: So. Cal
Posts: 375
So true Ed!

The different lighting invariably comes up at a show. Rub a blade to get under a different light to see a coarse grit.

Before I would keep the garage door partway open to allow sunlight but the privacy and security aspect I began working with the door down. The Asian Tiger mosquito also became a more annoying past in '17 so another reason the door is down. I need to supplement the illumination in there.

The Kydex area is the one I'm setting up now. This is in a part of the shop that is not under my usual lighting so I have a hard time seeing there. Costco has those shop LED fixtures though want to say they are 4000K. I've not liked that warm white look generally.

Ikea had those swing arm desk lamps for $12 but I need more height than what those offer. Will take in Home Depot to see what options may work.


__________________
Mike
Reply With Quote
  #4  
Old 01-12-2019, 06:38 AM
Crex's Avatar
Crex Crex is offline
Moderator
 
Join Date: Sep 2002
Location: Acworth, GA and/or Hanging Dog, NC
Posts: 3,446
I have limited space so I opted out on all but one swing arm for my leather stitcher (Tippman). I have a magnet based gooseneck - kind with a lever release that I use most everywhere else. It mounts solid on the kmg arm for grinding, saw deck when cutting, vise when working on something there. Use the newer led bulb so plenty of light, only draw back is having a cord sometimes gets aggravating. It has proven very handy.
I also have shop lights all over for general lighting that I plan to replace with the LEDs sometime this year as Ed has done, just got to find the time to stop and do it.


__________________
Carl Rechsteiner, Bladesmith
Georgia Custom Knifemakers Guild, Charter Member
Knifemakers Guild, voting member
Registered Master Artist - GA Council for the Arts
C Rex Custom Knives

Blade Show Table 5-J
Reply With Quote
  #5  
Old 01-12-2019, 02:25 PM
M&J's Avatar
M&J M&J is offline
Skilled
 
Join Date: Dec 2004
Location: So. Cal
Posts: 375
I like the LED type bulbs. The power company sends messages how "inefficient" or relative to my bill how my neighbors are. 95% of the lighting in the house is now LED from 9W or so. A few 4' fluorescent tubes still exist here and those are on the list to be updated.


__________________
Mike
Reply With Quote
Reply

Tags
550, back, blade, build, ca, cutting, grinding, kmg, knife, knives, kydex, leather, lights, release, sale, shop, show, vise, white


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Shop task multi tool Dublin Lee General ::: Items and Bargains 0 09-18-2008 11:29 PM
New Lighting set up Stephen F Knife Photography Discussion 3 01-11-2007 10:50 PM
Lighting floridafred Knife Photography Discussion 0 07-16-2003 07:38 PM
lighting help paul harm Knife Photography Discussion 6 02-08-2003 11:03 PM
Lighting mrsjoan Knife Photography Discussion 7 10-29-2002 12:19 PM


All times are GMT -5. The time now is 07:57 AM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved