![]() |
![]() |
![]() |
|
![]() |
![]() |
||
![]() |
![]() |
|
![]() |
|
Ed Caffrey's Workshop Talk to Ed Caffrey ... The Montana Bladesmith! Tips, tricks and more from an ABS Mastersmith. |
![]() |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
safety concern
i was sitting at my sander the other day after a week of grinding carbon steel, admiring my mini-mountain of iron dust rapidly turning into rust. i was getting started on grinding some aluminum when it occured to me this may be dangerous.
aluminum dust and iron oxide(rust) mixed form ferroaluminum thermite which is a very impressive incenidary, it will vaporize carbon steel and turn sand into glass near instantly. its a bit hard to light but i know magnesium sparks will ignite it...im also thinking titanium sparks would too. i dont think this is a huge concern because the dust has to be mixed in the proper ratios, then hot sparks to ignite it, but i thought i would mention it before a freak accident occurs and someone loses a leg. if your a messy workshop kinda guy like me, you may want to sweep between grinding these materials. -jason aube |
#2
|
||||
|
||||
I agree! Letting dust accumulate around your grinding area is asking for trouble. At one time I owned a dust collection system, but found that a spark from grinding steel could easily turn the whole thing into a melt down.........hence, I no longer use a dust collection system.........just buckets of soapy water suspended benieth each grinder.
__________________ WWW.CAFFREYKNIVES.NET ![]() Caffreyknives@gmail.com "Every CHOICE has a CONSEQUENCE, and all your CONSEQUENCES are a result of your CHOICES." |
#3
|
|||
|
|||
Ed,
Next time you are over here I'll show you how we use a spark quench bucket with our 1800 CFM dust collector. We used to have about one small titanium dust fire per month before we combined the DC with the bucket. I think it is important to remove the smoke and fumes caused by grinding from the area. If you are grinding 6-4 titanium and see sparks, the smoke from the sparks contain vanadium which can be inhaled. If you breath enough you will get VERY sick. I suppose the high vanadium steels could also be a problem. Titanium and steel grinding dust mixed together is much more flammable than titanium alone. Does anybody know why? The resulting fire burns much faster than a titanium fire. It looks almost like flash powder! ![]() |
#4
|
||||
|
||||
now that you mention it chuck i recall that thermite is a mixture of iron oxide and any reactive metal(aluminum, titanium, niobium, etc)...so that flash fire is probably a poorly mixed thermite lol.
some nasty stuff, the military even puts in in gernades and uses them to destroy classified materials if they are about to be captured |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|