MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Tool Time

Tool Time Let's talk shop. Equipment, Tips & Tricks, Safety issues - Post it here.

Reply
 
Thread Tools Display Modes
  #1  
Old 03-05-2002, 09:54 AM
Don Halter
Guest
 
Posts: n/a
Tube furnaces


Anyone have experience with large tube furnaces? Through some wheel'n and deal'n I ended up with three 48"x 8" and two 66" x 6" electric tube furnaces (220V, 3-phase). The longer ones are only rated at 1000 F, but the shorter ones are 1875 F or possibly 2200 F furnaces. There are no control boxes or anything, just the furnace with the connectors. I was hoping to be able to get one hooked up and trade off or sell the others. Without the original control panel or housings, I don't know who made them or the amperage or power it runs at. I have no other information on them. I think they are made by Marshal (one has the housing for the panel still attached, but it is not the same style as the others. One has a serial number which I'll be contacting Marshal to see if it's theirs. These are all in excellent shape and have only been used 2-3 times. Plus, they had quartz inserts when they were used so the filaments and interiors are clean. If anyone is familiar with these and could possibly identify them by filament/tube/connector type, I can take some pics. Thanks in advance for any info.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

(View-All Members who have read this thread : 1
runner
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 09:57 AM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved