Custom Knives | Other Knives | General Items
New Posts | New PhotosAll Photos

Go Back   The Knife Network Forums : Knife Making Discussions > Community Discussion Boards > Knife Network Community > This Old Knife

This Old Knife Here is a little forum dedicated to talking about, but not limited to, vintage and antique knives. Pics and stories of special knives or your favorite patterns are encouraged. No experts here. Just guys chattin about old knives and the legends we hav

Thread Tools Display Modes
Old 08-19-2014, 06:31 AM
wardoc247 wardoc247 is offline
Join Date: Aug 2014
Posts: 1
Brass Meat Ax found in South Carolina

I found this Ideal Meat Ax over the weekend and my google-fu has failed me. It has a cast brass handle with a meat tenderizer on one side and a blade that is secured by two machine screws on the other. The blade is 3/16" thick with a 5 1/4" cutting edge. The handle is 6" long and the overall length of of the brass is 10". The tenderizer is also 2" round. The blade has some rust on it but and if removed will most likely leave some pitting. It also seems as if someone attempted to clean the blade with acid or some other corrosive compound because the blade is etched with wiping swirl marks. Any info on it would be appreciated.

I always try to leave a blade as I found it, because it can be easily removed and worked on, and mainly because of the etching, I'm considering refinishing the blade.

Any comments, questions, and smart ass remarks will be valued.
Reply With Quote

acid, blade, brass, edge, etching, handle, knife

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
shop tools wanted in south carolina whancock General ::: Items and Bargains 1 03-07-2014 09:42 PM
Found an old looking all brass folding knife with a brass blade, information? rx7rotary13b Knife Network Community 2 02-10-2012 10:17 PM
Meat tools B.Finnigan The Outpost 2 12-10-2005 12:29 PM
South Carolina Knifemakers Association Website Cavelady Knife Network Community 0 12-06-2005 05:28 AM
Meat cleaver steel? nc_cooter The Newbies Arena 2 05-20-2005 08:26 AM

All times are GMT -5. The time now is 04:29 PM.

Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved