|
|
Register | All Photos | FAQ | Members List | Calendar | ShopStream (Radio/TV) | Search | Today's Posts | Mark Forums Read |
The Supply Center What's Hot ... and where the deals are! Supplies are our specialty ... |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
S-5 Tool Steel
Looking to find a supplier of this steel, in widths and thickness, that can be used for knife blades. TIA!
Ken (wwjd) __________________ Ken (wwjd) http://www.wacoknives.com "One Nation Under God" |
#2
|
|||
|
|||
To my knowlage S5 is more a "spring-steel" than "tool steel".(one of the tool applications might be jackhammer bits)
Here in Antwerp I can get it from a company specialized in springs for trucks. They sell standard replacement flat and coil springs, but can make special springs on request.They can order the annealed flat bars from their supplier . sizes start there from 1/4"x1.5" (6x40mm) length 20'.price last year: approx. 2.5? (USD) per kg= 27 USD per 20ft 8x45mm was 40 USD per 20ft (without 21%VAT) I hope this helps Jan |
Tags |
knife |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|