MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Knife Making Discussions > The Newbies Arena

The Newbies Arena Are you new to knife making? Here is all the help you will need.

Reply
 
Thread Tools Display Modes
  #16  
Old 06-20-2019, 03:16 PM
Doug Lester Doug Lester is offline
Hall of Famer
 
Join Date: Sep 2006
Location: Decatur, IL
Posts: 2,551
That's nice to know about the "in between" carbide bits. I hadn't been able to find them before. I'll have to look into them.

Doug


__________________
If you're not making mistakes then you're not trying hard enough
Reply With Quote
  #17  
Old 06-22-2019, 07:43 AM
Crex's Avatar
Crex Crex is offline
Moderator
 
Join Date: Sep 2002
Location: Acworth, GA and/or Hanging Dog, NC
Posts: 3,474
Being 1080 and annealed, you're dealing with dull bits. Probably hardened your spot as described previously. Just take a torch (lp will work) and heat the tang area to cherry red then let air cool (hold with pliers until cool to touch). Center punch from other side at pin location then use a sharp bit to cut your hole. No need for expensive carbide bits for 1080 series steel that's not been HT'd.


__________________
Carl Rechsteiner, Bladesmith
Georgia Custom Knifemakers Guild, Charter Member
Knifemakers Guild, voting member
Registered Master Artist - GA Council for the Arts
C Rex Custom Knives

Blade Show Table 5-J
Reply With Quote
  #18  
Old 06-26-2019, 07:37 AM
Zelix Zelix is offline
Member
 
Join Date: May 2013
Location: South West Georgia
Posts: 20
Quote:
Originally Posted by Crex View Post
You are surrounded by GA Guild members in that area. Check the Georgia Custom Knifemakers' Guid facebook page. We will be having the next meeting just up the road in Braselton. You are definitely welcome to attend and meet a bunch of makers from your area. Great networking op. We are a teaching guild and anyone interested in knives/knifemaking/supporting crafts are always welcome.
Thanks. I just sent a request to join the FB page.
Reply With Quote
Reply

Tags
5160, blade, ca, easy, file, heat, hunter, knife, knife making, knife supply, knives, make, making, neck knife, old file, paint, pins, project, simple, spray, stainless, steel, supply, tanto, video


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Noobie dumb question nwknight The Newbies Arena 7 06-25-2004 10:49 AM
Noobie struggling Don Cowles Fine Embellishment 11 02-02-2004 01:03 AM
Noobie Question, Tools! Sjohnson243 Tool Time 3 12-18-2003 01:15 PM
Noobie question on handle finishing. vAlvE 46 The Newbies Arena 1 02-20-2002 10:08 PM
Holiday Greeting Bob Warner Knife Network Community 3 12-20-2001 01:21 PM


All times are GMT -5. The time now is 09:43 PM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved