|
|
Register | All Photos | FAQ | Members List | Calendar | ShopStream (Radio/TV) | Search | Today's Posts | Mark Forums Read |
The Newbies Arena Are you new to knife making? Here is all the help you will need. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Norzon belts?
Does anyone out there have experience with Norzon belts from Norton? |
#2
|
|||
|
|||
I USE THE BLUE NORZONS FOR, IN THE LOWER GRITS, 40/60/80/100/120. THEY HAVE A PRETTY GOOD GRINDING LIFE, IF YOU ARE USING ANNEALED STEEL. BE SURE TO KEEP YOUR EDGES BEVELED BACK, OR THE EDGES WILL KNOCK THE GRIT FROM YOUR BELTS. I RATE THEM TO BE AS GOOD AS ANY OTHER BELT I HAVE USED IN THIS RANGE OF GRITS. I HOPE THIS HELPS WITH YOUR QUESTION, KEN (WWJD) |
#3
|
|||
|
|||
Thanks Ken Yes that helps. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
(View-All) Members who have read this thread : 0 | |
There are no names to display. |
Thread Tools | |
Display Modes | |
|
|