|
|
The Newbies Arena Are you new to knife making? Here is all the help you will need. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
blade blackened // patina??
im a novist i dont wount a coat i need advice to patina ore black out a blade ..
im looking for a tuff black like the military,s k.bar ore issue knifes any detailed help welcome rust blueing// black oxide something like these |
#2
|
||||
|
||||
The toughest black finish I know of is Boron Nitride. You would need to find a company (Google, Yellow Pages) to do that for you, it's not an easy home brew process.
Brownell's sells a product called Moly Kote. You can spray this product on your blade like spray paint, then bake it in your oven at 300 F for an hour and you have a fairly durable black finish. Moly Kote comes in glossy black or matte black as well as several colors ... |
#3
|
|||
|
|||
Or you can just coat it in some sort of vegetable or animal fat and bake it at 300F and get a similar coating.......
Now if you are after a DIY coating that is going to stand up to some punishment, look into doing a home-brew parkerization, it's similar to bluing, but much more robust, and doable as a home chemist. Even though it's commonly used on firearms it should do what you want it to, and there are several different additives for making it that nice blue/black finish. |
#4
|
||||
|
||||
Several things come to mind.
A weakened muratic acid dip. or you can take heated blade and rub it with toilet bowl wax. I don't think I would use an old used wax ring...Smile |
#5
|
|||
|
|||
Imaketings what kind of finish should i exspect with theanimal fat
|
#6
|
|||
|
|||
Anthony Chaney . useing weakened muric acid dip how would i go about that and being acid would that eat up my blade
|
#7
|
|||
|
|||
ray rogers ive never hear of BORON NITRITE can you direct me to what it it is & what kind finish to exspect
|
#8
|
||||
|
||||
Boron Nitride is the hardest coating that I know of that can be put on a blade. You said you wanted tough, that's the toughest there is. There was a Buck knife, Night something or other, that used it. But, like I said, you'd need to find a place that could do that for you. I don't think there's any way to do that one at home....
|
#9
|
||||
|
||||
I suppose it would if you left it in for awhile. I would do some brief dips until I got the coating I wanted. Be sure you use protective gear. Acid is nothing to play with. I used to have a recipe from a buddy of mine, but I have seemed to have misplaced it.
|
#10
|
||||
|
||||
He did say 'weakened' acid, not full strength. Or, you could use ferric chloride - that's just circuit board etchant, mix it one part FeCl to 3 parts distilled water. That's what most of us use to etch damascus. It will turn 1084 pretty much black, most other carbon steels will get dark grey. Or, even vinegar will darken a carbon blade although it works very slowly....
|
#11
|
|||
|
|||
Quote:
Same process, just not going to be as robust as some of the others out there. |
#12
|
||||
|
||||
Brownells has something called gun kote that has a epoxie resen in it and you spray it on and bake it . It is very tuff and I have used it on knives and guns before. Brownells has been back ordered on the aresol cans of this stuff so I did some checking and K&G industries is the supplier for this spray paint and they are cheaper but they only have it in cans of paint you have to have a sprayer to apply it.
The tuffest spray and bake is ceracoat it is almost 10 times tuffer than the rest. Check it out on the net. This stuff is bad ass. I will be spraying this stuff next!!!! MoblMec |
#13
|
|||
|
|||
blade blackened // patina??
Quote:
|
#14
|
|||
|
|||
my mom wen i had her used i think she used lard to season her iron skillets would that be what our telling me
|
#15
|
|||
|
|||
Yup, lard will work fine, just don't go above 300F if you can help it. Like I said, it's not going to be robust as many of the other coatings out there, but it will do for slowing/stopping rust and you get that black look you're after.
Do a couple tests on similar pieces of metal to make sure you're going to get the finish you desire. |
Tags |
acid, advice, apply, at home, back, bee, blade, buck, coat, damascus, easy, forge, heat, home, how to, knife, knives, make, making, military, paint, spray, wax, what kind |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
blackened steel fittings | bj976 | The Newbies Arena | 7 | 10-07-2005 12:52 PM |
Carbon blade patina | TAH | Randall Knives Forum | 16 | 09-15-2005 07:47 AM |
Patina ? | MongoForge | The Sheath/Holster Makers Forum | 10 | 06-30-2004 09:08 AM |
Patina | Taz575 | The Newbies Arena | 4 | 08-15-2001 02:53 PM |
Patina looking bone? | kvistads | The Newbies Arena | 4 | 08-11-2001 05:56 AM |