MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Factory Knife Customization & Mid-Tech Boards > Knife Kits Forum

Knife Kits Forum New to the art of knife making? Learn to make awesome knives, using advanced hands-on training inside. From KnifeKits.com.

Reply
 
Thread Tools Display Modes
  #1  
Old 05-22-2016, 05:29 PM
andyf andyf is offline
Registered
 
Join Date: May 2016
Posts: 1
ss 2.0 should lock in the open position?

If I remove the blade stop pin, I can open the blade enough for the push-button lock to pop out and hold the blade open.

However, with the blade stop pin installed, the blade doesn't open enough. Which should I grind to make more room? Try to make the blade stop pin a smaller diameter or grind on the blade to allow it to go back further or around a larger stop pin?



Also, how critical are both of the standoffs? one of my standoffs is not threaded. For the time being, I have one standoff installed the farthest from the pivot pin.

thx,
andy
Reply With Quote
  #2  
Old 05-24-2016, 11:21 AM
HolsterSmith HolsterSmith is offline
Moderator
 
Join Date: May 2016
Posts: 21
Hi Andy,

Thank you for your business!

Please give David Pearce at KnifeKits.com a call at 877-255-6433. He can help you with your question.


__________________
Best Regards,
Customer Service
Build The Best
www.CKKIndustries.com
www.KnifeKits.com
www.HolsterSmith.com
877-255-6433
Reply With Quote
Reply

Tags
back, blade, button lock, grind, knife, knifekits, knifekits.com, lock, make, pivot


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Burner Angle / Position dtec1 The Newbies Arena 30 10-07-2015 05:30 PM
Teaching Position... Dana Acker The Outpost 7 10-20-2005 12:58 PM
shop position available knightsteel Texas Knifemakers and Collectors Association 0 03-25-2004 07:12 PM
shop position available knightsteel The Outpost 0 03-25-2004 07:11 PM
Best Position for Grinding Kevin Miller The Newbies Arena 1 10-06-2001 11:21 AM


All times are GMT -5. The time now is 12:16 AM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved