MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Ed Caffrey's Workshop

Ed Caffrey's Workshop Talk to Ed Caffrey ... The Montana Bladesmith! Tips, tricks and more from an ABS Mastersmith.

Reply
 
Thread Tools Display Modes
  #1  
Old 07-30-2014, 05:03 PM
Dana Hackney's Avatar
Dana Hackney Dana Hackney is offline
Skilled
 
Join Date: Feb 2006
Location: Bonners Ferry, ID
Posts: 537
Emerging from work detail in North Idaho!

hey gang!

It's been waaaaay too long since my last visit here. We moved from Colorado in early June and have been in the process of building a small home with LARGE decks! I'm guessing we are about half way there now and still have the hvac, electric, plumbing and interior....hmmmm, maybe we are only a third the way there....

We never dreamed it would be this much work, and, at 65+ it's been a challenge to say the least......whew! I've lost three inches off the waist line and am sore all the time!

Steve and Malissa Kelly came over last weekend and finished out the 60+ % left in the wiring of the shop. How great is that?! They even brought some of Ed's elk burger over.....what a bunch of fine folk we have gotten to know in this craft!!!!!We have also gotten to have Bruce and Kaye Bump up for a visit too. That's always a treat!

Anyone ever dropping thru our area is MOHRE than welcome to drop in for a visit.

I think I'm going to need a refresher course on knife making when this winter comes,as it looks like it'll be that long before I'm back in the shop.

Well, better get off the couch (yeah, right!) and get back to work.

Take care friends!
Dana
Attached Images
File Type: jpg image.jpg (201.9 KB, 56 views)
Reply With Quote
  #2  
Old 07-31-2014, 06:01 AM
MLAZYB's Avatar
MLAZYB MLAZYB is offline
Skilled
 
Join Date: Dec 2006
Location: Spring Creek Nv
Posts: 458
Dana, Glad to hear your finally moved. Looks like you have quite a bit of work ahead. Looking forward to seeing more.


Bing


__________________
Bruce Bingenheimer
MLazyB Custom Knives
ABS Journeyman Smith
Reply With Quote
  #3  
Old 07-31-2014, 07:31 AM
Ed Caffrey's Avatar
Ed Caffrey Ed Caffrey is offline
Super Moderator
 
Join Date: Jun 2002
Location: Great Falls, Montana, USA
Posts: 4,178
Send a message via AIM to Ed Caffrey Send a message via Yahoo to Ed Caffrey
Sorry I couldn't be there to help with the wiring Dana! I'll make it up to ya somehow. (as long as you don't make me pour concrete!)

Things are lookin good, and I suspect be the time winter hits you'll be "snug as a bug" in your new home.....or better yet...your NEW shop!

Love you folks!


__________________




Caffreyknives@gmail.com
"Nobody cares what you know.....until they know you care."
See me at table 2Q at the Blade Show!
Reply With Quote
  #4  
Old 07-31-2014, 12:11 PM
cdent cdent is offline
Master
 
Join Date: Aug 2005
Location: aiea, hi
Posts: 787
Great update Dana. Yup, might take a bit more work to get things buttoned up, but congrats on the progress.

Take care, Craig
Reply With Quote
  #5  
Old 08-04-2014, 12:38 PM
Dana Hackney's Avatar
Dana Hackney Dana Hackney is offline
Skilled
 
Join Date: Feb 2006
Location: Bonners Ferry, ID
Posts: 537
Hiya Ed, Bing, and Craig!

Got a little more done on the front deck. The builder had access to some nice cedar logs for the uprights on the front porch. Gosh, we feel like we are bulding a mansion instead of a functional, simple house!

Hope you all are well and busy!

Kind regards,
Dana
Attached Images
File Type: jpg image.jpg (258.3 KB, 25 views)
Reply With Quote
  #6  
Old 08-06-2014, 01:29 AM
Jim T Jim T is offline
Steel Addict
 
Join Date: Oct 2009
Location: Alberta, Canada
Posts: 237
Wow, Dana! Looks like it's going to be a beautiful house! I'm jealous. Got any pics pf the shop you're building along with the house?

Jim T
Reply With Quote
  #7  
Old 08-06-2014, 08:37 AM
Steven Kelly's Avatar
Steven Kelly Steven Kelly is offline
Steel Addict
 
Join Date: Oct 2005
Location: Bigfork, Montana
Posts: 203
Hey Dana,
It was really a lot of fun getting to come over and visit. Malissa and I enjoyed every minute we were there. We are looking forward to next time!!!!


__________________
Steven Kelly
A.B.S. J.S.

S.K. Knives
11407 Spotted Fawn Ln.
Bigfork, Mt. 59911
(406)837-1489
www.skknives.com
Reply With Quote
  #8  
Old 08-07-2014, 08:54 AM
Dana Hackney's Avatar
Dana Hackney Dana Hackney is offline
Skilled
 
Join Date: Feb 2006
Location: Bonners Ferry, ID
Posts: 537
Hi gang!

Sorry fir the delay in answering. We're headed for colorado for a short visit with the family and crashed in Sheridan, Wy for the night. Say, if you are ever needing a NICE and reasonable place to stay try The Mill Inn. It's the best place we've stayed in for a looong time, at only 80 a nite,

Steve, you saved us so much time and effort with your electrical prowess that is not even funny! The place should be insulated and rocked in inside three weeks! I'll get some pics posted then Jim, then you'll need to come see it in person. This invite is an open one frineds

Well, back on I25...."talk" to ya'all soon ,

Kind regards,
Dana
Reply With Quote
Reply

Tags
back, bee, building, craft, electrical, home, knife, knife making, make, making, shop, simple


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
New digs in north Idaho Dana Hackney Ed Caffrey's Workshop 11 02-01-2014 03:00 PM
Idaho Hunter Kenhills Knives For Sale - Custom 0 11-16-2013 09:15 AM
First Try At Detail Filing rockhound The Newbies Arena 43 11-01-2012 10:58 AM
Who can tell me more in detail about MelliFobian This Old Knife 0 12-24-2006 08:43 AM
Tell me about SW Idaho Mike Routen Knife Network Community 2 06-16-2005 09:01 PM


All times are GMT -5. The time now is 07:35 PM.




KNIFENETWORK.COM
Copyright © 2000
CKK Industries, Inc. • All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved