Custom Knives | Other Knives | General Items
New Posts | New PhotosAll Photos

Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Ed Caffrey's Workshop

Ed Caffrey's Workshop Talk to Ed Caffrey ... The Montana Bladesmith! Tips, tricks and more from an ABS Mastersmith.

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 08-23-2014, 10:26 AM
Ed Caffrey's Avatar
Ed Caffrey Ed Caffrey is offline
Super Moderator
Join Date: Jun 2002
Location: Great Falls, Montana, USA
Posts: 4,254
Send a message via AIM to Ed Caffrey Send a message via Yahoo to Ed Caffrey
ChopSaw table upgrade

After seeing a version of this at my good buddy, Jim Clow's place, I've been meaning to do this to my chopsaw for a couple of years now......yesterday I was cutting up some "W" pattern for restacking, stepped on a small leftover that had hit floor.....and ended up doing the splits! So I finally got busy and got it done.

Jim's is a much more refined version, and he has a MUCH nicer chopsaw table them me.....but I went to the scrap pile, dragged out some stuff, and went to work. I replaced the table top, and built a "funnel" system, with a sliding drawer under the "funnel" catch all the stuff that would otherwise end up on the shop floor. Works great! Just one of those "improvements" that makes life around the shop not so dangerous (I'm way too old to be doing the splits!)

I pulled the rubber "feet" off the chopsaw, and used the existing screws to "bolt" the saw to the table top.......and in turn used self drilling screws to attched the table top to the frame....that way when the saw wears out, I can remove the table top, remove the saw, and replace it without having to rebuild a whole new table.

"Nobody cares what you know.....until they know you care."
See me at table 2Q at the Blade Show!
Reply With Quote

bee, military, pattern, shop, simple

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Table 24-E, Our Table at Blade 2010 RandyScott Georgia Knifemaker's Guild 4 06-03-2010 02:24 PM
Upgrade de 2008 DJobim SBC Forum (Sociedade Brasileira de Cuteleiros) 23 03-17-2008 08:11 AM
Vaquero upgrade Bill Brockway Fine Embellishment 17 11-30-2006 02:29 PM
Old Grinder upgrade maswindell Tool Time 2 12-14-2004 01:09 AM
Website upgrade blackstocks Member Web Sites : Links & Updates 0 02-04-2002 09:20 PM

All times are GMT -5. The time now is 04:30 PM.

Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved