|
|
Register | All Photos | FAQ | Members List | Calendar | ShopStream (Radio/TV) | Search | Today's Posts | Mark Forums Read |
The Newbies Arena Are you new to knife making? Here is all the help you will need. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Finished my home built 2x72 grinder
After a long session in the shop yesterday I finally finished my 2x72 grinder. I've got to say a big thanks to both Rob Frink of Beaumont metal works and Wayne Goddard, they were both VERY helpful with advice on building this grinder and they helped me through a couple of spots where I got "stuck" building it. Rob did EXCELLENT work on the crowned idler wheel and the custom shaft he turned to fit a Grizzly contact wheel. Wayne's section on home built grinders in his "$50 Knife Shop" book is a great reference, I don't know how many times I re-read that chapter when building this thing. You can see somewhat detailed steps on how I built it at: www.derekmelton.com Here's me grinding my first piece of steel on the grinder: www.derekmelton.com/knife...tgrind.jpg I guess I spent about $150-200 total on this grinder. Some may say that would be better spent on a Grizzly or a Coote but I have the satisfaction of having made my own and it's very easy to modify now since it's all bolted together construction. Now, if I can just learn how to use this beast I'll be set! Thanks, Derek Melton |
#2
|
|||
|
|||
nothing as good as making your own tools. Best thing is if it ever breaks down on you...you can fix it! |
#3
|
|||
|
|||
That is Cool Derek, I built my last one and love it. I also got some of the parts from Rob and he did a first class job. Mike |
#4
|
|||
|
|||
Hey Derek, right on. Your web site is getting big and is fun and informative. ghostdog |
#5
|
|||
|
|||
Wow good looking stuff! Looks like you had fun making that baby! How's it workin' for ya?? |
#6
|
|||
|
|||
Great looking grinder Derek, I agree with you Waynes book has to be the best for anyone building there own grinder. I've nearly finished mine and I to found Waynes book to be of great help. Once you start building your own tools it's nearly as adictive as knifemaking!! ( built my own 9" disk grinder, small milling machine, belt grinder and air compressor.) keep us informed on how you get on with you first hollow grind. Andy.. |
#7
|
|||
|
|||
Homebuilt grinder, first try
Well, I tried flat grinding out a pocket knife blade last night. I used a 36 grit to hog the metal off and profile it, this worked great. I then tried cutting in my blade bevels and it seems that after reading literally hundreds of articles and pages about how to grind I forgot all of it and nearly ruined the blade. I am going to try again using a wooden jig/pushblock to keep my grind more straight tonight. I'll post some pic's of the progress. Hey Andy, I'd be REAL interested in seeing how you built a milling machine! Thanks for the comments! Derek |
#8
|
|||
|
|||
Re: Homebuilt grinder, first try
Hi Derek I will try and get a few photo's together this weekend. It's based on the style of a Taig mini mill if you know what one of those looks like. Andy.. |
#9
|
|||
|
|||
re: andy's mill
Thanks Andy I'd love to have a mini mill, and it'd be fun to try and make one. Thanks! Derek |
#10
|
|||
|
|||
Re: re: andy's mill
Hi Derek Here's a few photo's of my home made mini mill. It works great on most materials including Titanium. I can use end mills to about 3/8" with no chatter. The motor is a 110V dc servo motor with electronic speed control 0-2000 rpm on the motor and 3000rpm on the spindle which takes #1 morse taper tooling with a draw bar. The Z axis slides are box construction with 1/4" gib's . The Z axis leadscrew works on a split nut which takes out any play and locks the slide ridgid!!. If you nead any more info please get in touch Andy.. |
#11
|
|||
|
|||
Re: re: andy's mill
That looks real good Andy!! |
#12
|
|||
|
|||
Wow!
Wow, nice job on the mill Andy! I doubt I'm up to that kind of a challenge yet, looks like you have some machinist in you. Update on my grinder, works great but it burned up the craftsman 1/2hp motor I had on it. I was rough profiling some pocket knife blanks and the motor literally went up in smoke. I just got a 2hp motor from Harbor Frieght that should run it much better. Using the 1/2hp motor I noticed I could slow it down rather easily when putting much pressure on the belt while grinding. Notice to all who are making their own grinder: Get at least a 1 to 1.5 hp motor for a 2x72 they will eat a small motor for lunch. Derek www.derekmelton.com |
#13
|
|||
|
|||
Re: Wow!
Thanks Derek and Jens, Sorry to here of your motor problems, hope my 3/4 hp on the new grinder will hold up!!!. It's a real top quality one that is totally enclosed and fan cooled. The milling machine was only my second machine project, the first being a small air compressor made from a refrigeration pump when I was 17 (23years ago !!!). I have no machinist training at all .My everyday work is industrial contracting working mainly with timber. If you are interested in building workshop tools do a search on a Guy called Dave Gingery, he does a great range of "how to books" on building such tools as a home made lathe, milling machine, furnaces ,etc. Andy.. |
#14
|
|||
|
|||
Motor woes
Well, last night I finally got some time to try hooking up the new 2hp motor to the grinder. It works, but it throws the breaker on my temporary electrical connection to my shop! I have an extension cord run out there while I'm laying the conduit for the electric line and that 2hp motor doesn't like ANYTHING else to be turned on when it goes. I guess I'll have to wait until I have the 200a breaker box hooked up to actually get anything done. Hurry up and wait, it's the story of my knifemaking journey. Derek www.derekmelton.com |
Tags |
blade, folding knife, knife |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
(View-All) Members who have read this thread : 10 | |
BCROB, C?sar Pereira, coldtracker, glassdragon, irondun, metal99, Miluso, reddawg, s mcfall, Wannabe1 |
Thread Tools | |
Display Modes | |
|
|