MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Ed Caffrey's Workshop

Ed Caffrey's Workshop Talk to Ed Caffrey ... The Montana Bladesmith! Tips, tricks and more from an ABS Mastersmith.

Reply
 
Thread Tools Display Modes
  #1  
Old 08-11-2021, 10:50 AM
Ed Caffrey's Avatar
Ed Caffrey Ed Caffrey is offline
Super Moderator
 
Join Date: Jun 2002
Location: Great Falls, Montana, USA
Posts: 4,352
Send a message via AIM to Ed Caffrey Send a message via Yahoo to Ed Caffrey
Is it worth the effort to seek/achieve the ABS JS and MS Certifications?

The title question is one that is often asked. In the post the exact working was..... "For most knife makers ....taking 5 knives out of their time and money to test is to starve and face eviction" Here was my response.... (Link is to the entire Post/Thread) : https://www.facebook.com/groups/ARTKNIVESandMAKERS/posts/2102661216540832/?comment_id=2104565129683774&notif_id=1628690025797746&ref=notif&notif_t=group_comment_mention


The following link is directly to my input/response:

https://www.facebook.com/groups/ARTK...tion&ref=notif


__________________
WWW.CAFFREYKNIVES.NET

Caffreyknives@gmail.com

"Nobody cares what you know.....until they know you care."
Reply With Quote
  #2  
Old 08-11-2021, 03:45 PM
Doug Lester Doug Lester is offline
Hall of Famer
 
Join Date: Sep 2006
Location: Decatur, IL
Posts: 2,582
The answer FOR ME is no. The ABS doesn't give those stamps away, nor should they. They take effort and time. You need to make the commitment to go to the Bill Moran school or a least to find a Master Smith to work with. I attended a hammer-in and attended a class on preparing for testing and the presenter said that a smith has basically no chance of passing those tests without it.

Doug


__________________
If you're not making mistakes then you're not trying hard enough
Reply With Quote
  #3  
Old 08-11-2021, 05:30 PM
Ed Caffrey's Avatar
Ed Caffrey Ed Caffrey is offline
Super Moderator
 
Join Date: Jun 2002
Location: Great Falls, Montana, USA
Posts: 4,352
Send a message via AIM to Ed Caffrey Send a message via Yahoo to Ed Caffrey
In my experience, as one who chose to walk the path, I would agree with all of that.

I personally never attended the ABS School, but than again, I was active duty military at the time, and was never able to fit it in, or afford it at that time. That being said, I did rely heavily on advice/guidance from Mastersmiths, and without their help/advice, I doubt I would have passed either my JS or MS tests. However, I believe that is a built in part of the ascension to both JS and MS certifications... learning the in/outs, of not only the making knives nuances, but also some nuances of both the ABS, and the custom knife industry.... at least that was the ancillary info/learning I got out of it.

It's certainly not for everyone, and it does require a high degree of commitment to successfully navigate. But for me, it improved my work/knives in ways that nothing else could have, forced me to go far outside my then comfort zone, and opened a world/realm of Bladesmithing, that otherwise would not have been accessible in terms of teaching and credibility in the craft.

Shortly after I achieved my MS certification, our local community college called me up, and asked if I would "build and administer" and "Metal Arts" program. I couldn't understand why they would be calling me, and when I asked, I was told "You just achieved a Master's certification", and that in their eyes it was the equivalent of any other Master's Degree.... so they wanted to hire me. I told them that I very much appreciated the offer, but I wanted to do my own thing. The point being, that opportunity would never have presented itself, had I not chosen the way I did. That is just one of many "doors" that opened because of making the choice/commitment to pursue the ABS path.


__________________
WWW.CAFFREYKNIVES.NET

Caffreyknives@gmail.com

"Nobody cares what you know.....until they know you care."

Last edited by Ed Caffrey; 08-12-2021 at 08:00 AM.
Reply With Quote
  #4  
Old 08-15-2021, 10:10 AM
KenH KenH is offline
Enthusiast
 
Join Date: Dec 2012
Location: South Baldwin Co across the bay from Mobile, AL
Posts: 83
I don't have the JS or MS certification, nor do I ever plan to attempt it (at 74 Not something I wish). BUT - with that said I do think it's VERY important for anyone considering making their living from bladesmithing. As in any other profession, certification is something customers look at, be it an engineer, nurse, doctor..... or bladesmith.
Reply With Quote
Reply

Tags
550, a, abs, advice, bee, bladesmithing, build, craft, hammer, knife, knives, make, makers, making, metal, military, mora, post, question, stamps, teaching, worth


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Latest effort Andrew Garrett The Display Case 2 01-30-2015 09:05 AM
Best effort so far dmoye Georgia Knifemaker's Guild 14 05-13-2012 09:14 AM
How to achieve better results using leather in handles ArielSalaverria Fit & Finish 13 06-27-2009 09:56 PM
latest best effort :) metalbender The Outpost 5 05-06-2009 10:07 PM
Latest Effort Andrew McLurkin Knife Photography Discussion 14 10-10-2007 09:42 PM


All times are GMT -5. The time now is 10:44 PM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved