my latest

[praktis]

Hi guys, i?d like to show you some of my latest work.
the first one is made out of Rwl 34 with black imitation mother of pearl.
it is 205 X 35 X 3.5 mm the cutting length of the blade is 100 mm.



the second one is made out of spring steel (not sure of which )
it was heat treated by Jason Cutter. (many thanks for giving it a try)
unfortunatly some dum s o b att work couldn?t keep his hands off and dropped the blade on the concrete floor. so i had to sand it down again. so i still have to etch again
it is 200 X 33 X 3.5 mm with a cutting length of 95mm. the handel is made out of stabilized maple burl.





thanks for looking and all comments are welcome

/Roger

[chrisinbeav]

Roger, very nice work...

Both knives look like they are really fine specimens... (I especially like the one with the imitation black MOP)

I do have one comment though.... pictures of knives in grass may not be the best idea. It makes it very hard to truely see the knife.

Chris Nilluka

[praktis]

Chris,
thanks for the advice.
i took a couple of new pictures, what dou you think of these?

/Roger

[circlepknives]

Those are much better pix Roger, Chris is right, in deep grass is not a good place to take pix.

Good work by the way!