Custom Knives | Other Knives | General Items
New Posts | New PhotosAll Photos

Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Knife Making Discussions > The Newbies Arena

The Newbies Arena New to Knife Making? Here's all the help you need ...

Thread Tools Display Modes
Old 01-31-2017, 10:00 PM
gkyle840 gkyle840 is offline
Steel Addict
Join Date: Oct 2016
Location: Columbus Ohio
Posts: 205
Most recent knife

Here is the knife I have been working on. It is my first saber grind and it turned out better than any I have tried to far. It actually looked pretty good until I started buffing the handle and went through the tape a few times and somehow got a good amount of tiny scratches on the bevel. I went to touch it up and ground to high on the bevel on both sides. Very displeased with the finish but excited I had a good saber grind and did my best job so far on the handle.

Last edited by gkyle840; 01-31-2017 at 10:07 PM.
Reply With Quote
Old 01-31-2017, 11:58 PM
jimmontg jimmontg is offline
Join Date: Jan 2016
Location: Now live in Las Cruces NM.
Posts: 1,077
Tape a piece of sandpaper very tight to a piece of wood or metal, tight, no slack, sharp corners. Work it forward from the handle, do not go back and forth with a sharp edge to the handle. That will help to get rid of the over scratches on the flats. May cause a bit of swirls at the handle, but better looking than those scratches.
Reply With Quote
Old 02-01-2017, 06:09 AM
Russ W. Russ W. is offline
Join Date: Jan 2017
Location: Suwanee, GA
Posts: 19
Tell me about the handle. Looks like micarta black/grey leather. How did you get the luster shine mines dull after sanding to 400 grit.
Reply With Quote
Old 02-01-2017, 06:47 AM
gkyle840 gkyle840 is offline
Steel Addict
Join Date: Oct 2016
Location: Columbus Ohio
Posts: 205
Jim I will give that a try.
The handle is black linen micarta. I worked my was up through the grits to 800 grit. I used really light pressure when I got past 400 grit. I then buffed it with a pink compound and that is what brought out the shine.
Reply With Quote

back, bee, bevel, blade, edge, file, finish, grind, handle, knife, leather, metal, micarta, pink, saber grind, sanding, sharp, tiny, wood

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
A few recent ones BJohnson The Display Case 1 07-14-2011 10:19 PM
Recent Project - Knife set Sean O'Hare The Display Case 5 12-27-2005 11:46 AM
A recent buy... JoJoKnives Knife Collecting 3 09-07-2005 02:54 PM
Another recent job Ray Cover Jr Fine Embellishment 6 03-02-2005 06:47 PM
Recent bowie knife brucep The Display Case 16 02-06-2004 06:27 PM

All times are GMT -5. The time now is 08:01 AM.

Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved