|
|
|
|
|
|
||
|
|
|
|
||
|
|||||||
| The Newbies Arena Are you new to knife making? Here is all the help you will need. |
 |
|
|
Thread Tools | Display Modes |
|
#1
12-06-2004, 10:48 PM
|
|||
|
|||
|
Attaching damascus bolsters
I guess I am a " newbie" to this . I hava made about 25 " handmade" knives from big saw blades. I have also made about 50 knives from bought blades. They are much better looking I guess , to the customers anyway , thats what they want. I almost have my belt grinder put together, so I can start making more " handmade " blades. I fasioned my grinder after the KMG one I found on the internet. Except I made mine into a bench , with one 2 hp var speed motor running the grinder and a set of buffing wheels. Sorry I'm rambling on. My question was how do you attach damascus bolsters without being able to see the pin?
Any help would be greatly appreciated thanks Dwane 
|
|
#2
12-07-2004, 08:10 AM
|
||||
|
||||
|
http://www.knifenetwork.com/forum/sh...ht=hidden+pins
http://www.knifenetwork.com/forum/sh...ht=hidden+pins Try those for starters. The search function really will be your best friend, but don't be afraid to ask if you don't find what you need. Welcome to the Forums! __________________ Jamey Saunders -- Charter Member, GCKG (Got a question? Have you tried to  for the answer?) "I won't be wronged, I won't be insulted, and I won't be laid a hand on. I don't do these things to other people, and I require the same of them." --John Wayne, in The Shootist
|
|
| Tags |
| knife, knives |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Linear Mode
