MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Knife Making Discussions > The Newbies Arena

The Newbies Arena Are you new to knife making? Here is all the help you will need.

Reply
 
Thread Tools Display Modes
  #1  
Old 06-10-2022, 10:54 AM
Brewerpaul Brewerpaul is offline
Registered
 
Join Date: Jun 2022
Posts: 1
Handles for a kit knife

Hi all-- I'm not really a knife maker and don't have plans to get into it a lot as a hobby. I have too many hobbies already.
A couple of years ago I made a small Santoku and paring knife from Woodcraft kits. This involved adding wooden scales, and I did not use pins or rivets. I was not totally happy with my results. Mainly, the bolsters got scratched up from my shaping the handles. Still, they held up well and I enjoy using them.
I just bought a matching set of Katsura damascus blanks to make a wedding gift and I want to do them up right. This one, plus a matching paring knife and a diamond hone/sharpener which was a freebie for spending over $100

https://www.katsuracutlery.com/colle...e-55mm-no-logo

It comes with cutlery rivets and a pretty mosaic pin.

On my previous kit knives, I basically glued the blanks then did all the shaping on a belt sander plus hand sanding. That obviously didn't work out for me as I planned.
For equipment I have a drill press, scroll saw, 4x34"belt sander, Dremel with attachments, many hand tools

How does this strategy sound:
Rough cut rectangular scales from 3/8 stock available locally
Tape those together, good sides in and clamp them to the blank
Drill the holes
Trace the blank onto each scale with rivets temporarily in place for alignment.
Cut out the handle on my scroll saw, leaving it a tad large, final shape with sandpaper.
Hand sand the thickness to match the bolstser so as not to scratch the bolster
(basically totally shaping and sanding the handle, right down to the finest sandpaper before gluing and riveting the handle)
Epoxy and rivet the handle and clamp
Final hand sanding, covering the bolster with painter's tape.
Apply finish (thinking multiple coats of Danish oil)

Am I missing anything? Any better suggestions?
Reply With Quote
  #2  
Old 06-11-2022, 03:54 PM
M&J's Avatar
M&J M&J is offline
Skilled
 
Join Date: Dec 2004
Location: So. Cal
Posts: 689
That is one way and would be a suitable process.

My approach is get the handle scales flat and fitted up.
Drill for pins.
Cut handle material to about 1/8"-1/4" oversize.
Epoxy up.
Contour and shape to comfort.
The bolsters can be given a hand rub or buffing that way it is a smooth blend to the handle scales. The painters tape will leave a step so I would suggest gently sanding the bolsters and handle even no tape.
Sanded to about 600 or 1000 then apply the Danish oil.

Then enjoy your new knife!


__________________
Mike
Reply With Quote
  #3  
Old 06-11-2022, 05:20 PM
TexasJack's Avatar
TexasJack TexasJack is offline
Super Moderator
 
Join Date: Apr 2004
Location: Southeast Texas
Posts: 2,912
The only thing I see wrong with your method, Brewerpaul, is that if you don't be very careful when you drill your wood for the pins you can be at an angle when you put the sides on the knife "good side out". Either the pins won't go or you'll find yourself opening up the holes to make them fit and losing the tightness in the process.

As M&J pointed out, I'd leave some material on the handles so that it would be fitted after the epoxy.

A pretty nice kit, with holes already in place and with the right pins in the kit.


__________________
God bless Texas! Now let's secede!!
Reply With Quote
Reply

Tags
blade, blanks, bolsters, damascus, diamond, drill, hobby, hone, kit, kit knife, kits, knife, knives, made, mosaic, paring, paring knife, pins, press, products, rivets, sander, santoku, scales, thickness


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Grinding knife handles Peldor The Newbies Arena 9 12-08-2006 01:20 AM
Using Mesquite for other than knife handles rhrocker The Display Case 22 09-26-2006 07:23 PM
Ivory Knife Handles islandknifes Knife Network Community 3 11-06-2005 07:13 AM
Blacksmith knife handles Gene Chapman The Outpost 4 11-04-2004 09:04 AM
Stabilizing handles on the knife floridafred Knife Making Discussions 3 06-24-2003 06:55 AM


All times are GMT -5. The time now is 04:43 PM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved