|
|
General ::: Items and Bargains Good deals on useful items for sale by Knife Network members |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
O-1 in forging sizes
I am selling about 250lbs of O-1 in larger sizes. .5 inches thick and up. These are drops and mill ends. I am asking $3/lb plus shipping. Here are some pictures. If you have a specific size or weight i will do my best to set it up.
Thanks for looking __________________ http://www.woodchuckforge.com Avatar, Scott Taylor Memorial Scholarship Knife Photo by Bob Glassman Chuck Richards ABS J.S. Last edited by Woodchuck Forge; 07-11-2008 at 08:27 PM. |
#2
|
|||
|
|||
Chuck what is the thickest widest piece that you have?
__________________ Bill Burke ABS Master Smith 2008 |
#3
|
||||
|
||||
.625x8x24, Weighs 37lbs. Next id .75x4.875x11.75 12.75lbs, then .625x4.875x24 weighs 23lbs. Few others at .625 thick and in the 4.875 width.
__________________ http://www.woodchuckforge.com Avatar, Scott Taylor Memorial Scholarship Knife Photo by Bob Glassman Chuck Richards ABS J.S. |
#4
|
|||
|
|||
I'll take the 3/4 piece. do you have pay pal?
__________________ Bill Burke ABS Master Smith 2008 |
#5
|
||||
|
||||
Yeh. chuck@woodchukforge.com is my account. Do you want me to mail ti to you?? If you do send $47 if not then $38. If you want to wait for the OKCA show that would be OK too. I you are still interested in some of that 52100 let me know. Nick Wheeler is going to get some checked out. Give me a weight and I will cut it if I have to for the right size.
__________________ http://www.woodchuckforge.com Avatar, Scott Taylor Memorial Scholarship Knife Photo by Bob Glassman Chuck Richards ABS J.S. |
#6
|
|||
|
|||
pay pal sent
__________________ Bill Burke ABS Master Smith 2008 |
#7
|
||||
|
||||
Thanks Bill
__________________ http://www.woodchuckforge.com Avatar, Scott Taylor Memorial Scholarship Knife Photo by Bob Glassman Chuck Richards ABS J.S. |
#8
|
||||
|
||||
O1 is available in the following sizes
1x1.625x43.75.................. 1x1.625x57.875 1x1.625x19.5 ....................1x2x30.125 .75x2.125x45 ................... .75x1x41.5 ,625x1x35......................... .5x2.875x19.25 .5x2.125x27.75.................. .625x3.375x31.25 .5x3.5x24.......................... .5x4.25x14.75 .625x4.75x12.125................ .625x6x11.125 .625x7.125x7.75 There may be more than one of an item so please contact me if you are interested. I will cut to size and to fit into a flat rate box. Thanks for looking __________________ http://www.woodchuckforge.com Avatar, Scott Taylor Memorial Scholarship Knife Photo by Bob Glassman Chuck Richards ABS J.S. Last edited by Woodchuck Forge; 03-03-2008 at 07:52 PM. |
Tags |
forging |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|