MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Knife Making Discussions > The Newbies Arena

The Newbies Arena Are you new to knife making? Here is all the help you will need.

Reply
 
Thread Tools Display Modes
  #1  
Old 07-12-2024, 04:09 PM
lanadwodny0921 lanadwodny0921 is offline
 
Join Date: Oct 2014
Posts: 2
Knife Kits SG4 Handle Thickness

Trying to find what handle thickness do I need so I can hand sand and match them to the bolsters provided in kit. My hope is somebody will know so I don't have to make to separate order's to get my supplies. I appreciate any help you can provide.... Not new to knife making but a medical event has interrupted my journey and clouded my knowledge... Thank you again....
Reply With Quote
  #2  
Old 07-13-2024, 07:34 AM
Ray Rogers's Avatar
Ray Rogers Ray Rogers is offline
Founding Member / Moderator
 
Join Date: Jun 2002
Location: Wauconda, WA
Posts: 9,844
I haven't built an SG4 but I looked it up and it looks pretty typical. Bolsters in kits like that are usually 3/16" or maybe 1/4", not likely any more than that or the knife gets ridiculously heavy. Typical handle slabs would be 3/8" and tapered down to the bolsters.
If you want the slabs to be the same thickness as the bolsters I'd buy two sets, both 3/16" and 1/4". There are plenty of modestly priced slab materials available so it doesn't have to be expensive and you'll have an extra set that you can use sooner or later . . .


__________________

Your question may already have been answered - try the Search button first!






Reply With Quote
  #3  
Old 07-13-2024, 11:10 AM
lanadwodny0921 lanadwodny0921 is offline
 
Join Date: Oct 2014
Posts: 2
Double checking

That is what I was thinking, but wanted to make sure. This will be my first knife it quite a few years (8-10 years), I still have my 2"x 72", buffer, and some supplies but I figure it is better to start small and that way I can sift thru my supply inventory and see what is still good. Thank you for your response, I see the knife making community still has great people.....
Reply With Quote
Reply

Tags
art, bolsters, buffer, buy, ca, handle, kit, kits, knife, knife kits, knife making, make, making, materials, sand, small, supplies, supply, thickness


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
handle shape and thickness donnymac250 The Newbies Arena 12 09-29-2014 09:42 AM
What leather thickness for large knife? alexkuzn The Sheath/Holster Makers Forum 5 05-30-2007 10:23 PM
Thickness of knife edge before heat treat bgmills The Newbies Arena 3 11-25-2002 11:27 PM
boot knife thickness? Steve Vanderkolff The Newbies Arena 4 11-10-2001 11:50 PM


All times are GMT -5. The time now is 02:50 PM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved