MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Knife Making Discussions > Historical Inspiration

Historical Inspiration This forum is dedicated to the discussion of historical knife design and its influence on modern custom knife work.

Reply
 
Thread Tools Display Modes
  #1  
Old 12-29-2016, 06:08 PM
Kevin R. Cashen Kevin R. Cashen is offline
Skilled
 
Join Date: Feb 2003
Location: Hubbardston, MI
Posts: 324
My latest sword project

The medieval sword found in the river Witham is one of the most recognizable treasures at the British museum: http://www.britishmuseum.org/researc...36133&partId=1

A few years ago I had the rare privilege of spending an afternoon measuring and studying it first hand, and I had a feeling then that it was something special. Recently a good customer got his turn at having me make something and asked if there was something I would like to do (as I said, he is a good customer). This was my opportunity to try my hand at the Witham and get paid for doing it, so when he said that he loved that sword the fun began! I always thought that the original?s gaudy inscriptions were a distraction from its phenomenal lines and proportions, and so when I suggested that we go with a cleaner and more weapon-like version, my customer was on board and even suggested a brazil nut pommel to keep with the theme. This was going to be fun since it would also test my skills at redesigning what was perhaps a perfect medieval weapon with a slightly different hilt and pommel while still keeping the same flawless dynamics of balance points and center of percussion etc?





There was no decision to be made regarding blade material, it would, of course be my trade mark Crucible formula L6. But I found one of the biggest challenges of this blade immediately in the forging process- those narrow double fullers. I forged two blades to get the proportions of those grooves right and discovered a nasty twist that they gave to the process, and I say ?twist? not just metaphorically! Those fullers acted like two ?I? beams running down the blade causing any subtle strain imbalance to pull the blade in every crooked direction possible. It took longer to normalize the blade than it did to forge it, and the heating and cooling had to be exact.




But once forged, grinding the blade was a pleasure, it always is when doing these exact recreations because you can feel the blade come alive in your hands as you shave off each thousandth of an inch closer to the original. I knew that the tapers and cross sections of this blade were something unique, but I was not prepared for the feel of it in the hand. I have worked with many really effective weapons that were the Hot Rod Fords or Chevy?s of their time, but the Witham is a Ferrari! Point tracking is so dead on that if a trained knight aimed it at you, your earthly affairs had better be in order, and yet this quick blade would cut like a laser.


Polishing was not too bad either, since the planes of the blade were all broken down into convenient narrow sections that gave up their scratches in short order. And those fullers reflected the light in a way that created great lines and almost Art Deco sleekness to the blade; I was so glad we didn?t go with the inlayed inscriptions.

For the cross and pommel we chose wrought iron, which completed the battlefield workhorse theme. The scabbard was tradition wood wrapped in a maroon goatskin bookbinding leather from a new supplier that I like. The chape took longer to make then the entire scabbard, since I hammered it out of sheet steel. Normally I would use non-ferrous, which raises and domes quite easily, the steel was much more ornery and required a bit more hot work, but in the end the hammered finish of the steel went well with the overall theme.


Last edited by Kevin R. Cashen; 12-29-2016 at 07:14 PM.
Reply With Quote
  #2  
Old 12-30-2016, 11:22 AM
Doug Lester Doug Lester is offline
Hall of Famer
 
Join Date: Sep 2006
Location: Decatur, IL
Posts: 2,612
Outstanding work. I'm sure your customer is happy with it.

Doug


__________________
If you're not making mistakes then you're not trying hard enough
Reply With Quote
  #3  
Old 02-02-2017, 06:17 AM
WBE WBE is offline
Skilled
 
Join Date: Feb 2009
Posts: 484
Beautiful Kevin. As always.
Reply With Quote
  #4  
Old 02-02-2017, 12:18 PM
Parqgonbowie Parqgonbowie is offline
Registered
 
Join Date: Feb 2017
Posts: 1
Hello I am new to this forum and I was wondering if anyone could help me find the value and rarity of a knife that was just given to me plz and thnx
Reply With Quote
Reply

Tags
arrow, battlefield, blades, finish, forged, forging, gallery, grinding, hand, hot, image, iron, knife, leather, made, make, material, pommel, project, rare, rod, steel, trade, weapons, wood


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
My latest project pieinthesky The Newbies Arena 33 02-07-2016 06:11 AM
latest project russt Fine Embellishment 2 08-19-2010 11:34 PM
Latest Project Andy S Fine Embellishment 24 03-11-2006 04:39 PM
Latest project Ray Cover Jr Fine Embellishment 12 03-03-2005 07:48 PM
Latest project DC KNIVES The Display Case 1 01-14-2004 10:55 AM


All times are GMT -5. The time now is 09:30 PM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved