|
|
Register | All Photos | FAQ | Members List | Calendar | ShopStream (Radio/TV) | Search | Today's Posts | Mark Forums Read |
Tool Time Let's talk shop. Equipment, Tips & Tricks, Safety issues - Post it here. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
If I only had a hammer...
... I could make another hammer.
Hmm, I already posted this down in the outpost, but this seems an appropriate place to crosspost... I finally finished making a new hammer, well mostly, I still need to cut a slot in the handle. Started out as a two pound ball peen. I squared the face, and made it really flat other then the edges. I think this will help me leave less, or at least shallower, hammer marks. I made the ball end into an almost straight diaginal peen. I have the holes drilled for the shock resistant handle though I don't have any good tools to make the slot so I'll have to figure that out. I haven't had a chance to use it yet but I think it'll work pretty well for me. |
#2
|
||||
|
||||
cool hammer AWP :cool:
|
#3
|
||||
|
||||
I like it. I wanna swing it!!!!!
__________________ "Many are chosen, but few are Pict" "The doer alone, learneth" NT Neo-Devo |
#4
|
||||
|
||||
I like it! I'm not much for straight peens, but that one looks pretty good - like I might want to make one for me!
|
#5
|
|||
|
|||
Since no one's mentioned it, thought I'd point it even has an "AwP" logo. - Jim
|
#6
|
|||
|
|||
Thanks for the comments. I got a chance to try it out, and it works pretty well so far for everything but heavy drawing. One problem though is that I think I tempered the face a little too soft, I tempered it to purple and it got slightly dinged up when I used it. Though better the hammer get dinged then the anvil I spose, hammers are cheaper and I could always make another .
__________________ ~Andrew W. "NT Cough'n Monkey" Petkus |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|