MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Knife Making Discussions > The Newbies Arena

The Newbies Arena Are you new to knife making? Here is all the help you will need.

Reply
 
Thread Tools Display Modes
  #1  
Old 03-19-2024, 04:10 PM
M&J's Avatar
M&J M&J is offline
Master
 
Join Date: Dec 2004
Location: So. Cal
Posts: 927
Fancy vs. bread butter pieces and the time

Was discussing this with a maker about the range of pieces relative to the $ they bring. Mainly folders because he said that for him to make a sheath it takes 4 hours to do. The time offset he dislikes making fixed blades because of that. We also went into the fancy works relative to the bread butter basics.

My question is: do you find the fancy ones to be equal, better or worse in terms of your time into making them up?

I'm debating whether I want to do something fancier or devote that time into making basics.


__________________
Mike
Reply With Quote
  #2  
Old 03-20-2024, 09:42 AM
Ray Rogers's Avatar
Ray Rogers Ray Rogers is offline
Founding Member / Moderator
 
Join Date: Jun 2002
Location: Wauconda, WA
Posts: 9,844
Define "fancy" . . .


__________________

Your question may already have been answered - try the Search button first!






Reply With Quote
  #3  
Old 03-20-2024, 02:11 PM
M&J's Avatar
M&J M&J is offline
Master
 
Join Date: Dec 2004
Location: So. Cal
Posts: 927
Curved with carved shaping, similar to what David Broadwell may do.


__________________
Mike
Reply With Quote
  #4  
Old 03-21-2024, 07:16 AM
Crex's Avatar
Crex Crex is offline
Moderator
 
Join Date: Sep 2002
Location: Acworth, GA and/or Hanging Dog, NC
Posts: 3,592
I do a good bit of both. Love working on the "fancy" just because of the extra challenges to get them right. However, since I do a lot of demo events and teach a few classes, I wind up with a lot of the B&B's to finish up. They do pay the bills.
I also like to make miniatures when time permits, but talk about time consuming. I can make a full size bowie style knife faster. Try tapping 0-80 threads for a fitted pommel in silver or fitting up a nice proportional "S" guard on a 1 1/2" damascus recurve blade, complete with fileworked spine. Yepper, will test your vocabulary for sure. No real money to be made in Minis, but I like them.


__________________
Carl Rechsteiner, Bladesmith
Georgia Custom Knifemakers Guild, Charter Member
Knifemakers Guild, voting member
Registered Master Artist - GA Council for the Arts
C Rex Custom Knives

Blade Show Table 6-H
Reply With Quote
  #5  
Old 03-21-2024, 10:26 AM
Ray Rogers's Avatar
Ray Rogers Ray Rogers is offline
Founding Member / Moderator
 
Join Date: Jun 2002
Location: Wauconda, WA
Posts: 9,844
My "fancy" was limited to damascus and burl wood shaped exactly like my more pedestrian knives. That was enough to give the impression of fancy without taking a lot more time to build . . .


__________________

Your question may already have been answered - try the Search button first!






Reply With Quote
  #6  
Old 03-21-2024, 02:39 PM
M&J's Avatar
M&J M&J is offline
Master
 
Join Date: Dec 2004
Location: So. Cal
Posts: 927
Did two tanto blades so was debating making them in a traditional manner with some aged flame birch picked up last summer. Copper, bronze and brass type fittings, etc. As well a slim bowie/fighter that is carved. For the challenge or is that frustration aspect.

Hand tapping 0-80 isn't fun. I typically use the Tapmatic yet there are times setting it up for a couple holes is more time consuming. Of course getting broken taps out isn't fun either and worse with blind holes. Probably a combination of easy and challenge...a middle ground spot that doesn't turn into a month+ project but that happens anyhow with those back burner ones.

Junko did a miniature with a simple ivory handle long ago. It was hard and sharpening it was hard too. She wasn't inclined to do another. LOL


__________________
Mike
Reply With Quote
  #7  
Old 03-26-2024, 07:18 AM
Crex's Avatar
Crex Crex is offline
Moderator
 
Join Date: Sep 2002
Location: Acworth, GA and/or Hanging Dog, NC
Posts: 3,592
I do heat treat my minis even though it's not really necessary, but think it makes the reworked damascus pop just a bit more. I take them to almost sharp, but quit going full sharp many moons ago. Probably the hardest part is finding handle material that still shows it's character on that scale. That and reworking my damascus scraps so the pattern fits the blade.
The Lorenzo's from Milan, Italy have a little over 100 of mine they have bought over the years they were still able to travel to the Blade Show. Really nice people to deal with. They had an upstairs private collection room in their knife store in Milan with well over a thousand custom knives they collected not to sell. Got to visit it once, truly an honor to even visit them and see the unbelievable collection displayed. Have no idea what's become of all that since the "Patrone" passed.


__________________
Carl Rechsteiner, Bladesmith
Georgia Custom Knifemakers Guild, Charter Member
Knifemakers Guild, voting member
Registered Master Artist - GA Council for the Arts
C Rex Custom Knives

Blade Show Table 6-H
Reply With Quote
  #8  
Old 03-27-2024, 12:56 PM
M&J's Avatar
M&J M&J is offline
Master
 
Join Date: Dec 2004
Location: So. Cal
Posts: 927
That's cool! Feels good to have collectors express how much they enjoy your works. Congrats!

Tom and Gwen Guinn were mini collectors here and their collection was amazing. Great couple too. We loved going to shows to see them and talk about knives. We visited them outside the shows too to just hang out.


__________________
Mike
Reply With Quote
  #9  
Old 04-01-2024, 03:30 PM
M&J's Avatar
M&J M&J is offline
Master
 
Join Date: Dec 2004
Location: So. Cal
Posts: 927
Quote:
Originally Posted by Ray Rogers View Post
My "fancy" was limited to damascus and burl wood shaped exactly like my more pedestrian knives. That was enough to give the impression of fancy without taking a lot more time to build . . .
This has been my interpretation for past works too. Attempting to fill a range of levels in the market is challenging. Enough have a range of prices to fit in these segments. That's the way this progresses so that we can have a broader market of buyers/collectors. The bulk of my works in '23 were basics.

Been trying to figure out where I want to be in '24 though we're 1/4 through. Feeling lost ATM so that was why I posted.


__________________
Mike
Reply With Quote
Reply

Tags
a, blade, blades, bowie, brass, build, burl, carved, damascus, demo, finish, fixed, guard, knife, knives, made, make, making, pommel, question, sharpening, sheath, silver, teach, wood


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Damasteel and Pearl Bread Knife. Jason Cutter The Display Case 4 04-09-2006 11:18 PM
This knife cuts butter like it's .... butter :) David Johansen The Display Case 14 05-26-2005 05:05 PM
Two new pieces in time for Christmas Robert Washburn The Display Case 1 12-24-2004 01:48 PM
Got Bread? hammerdownnow Knife Collecting 2 07-15-2004 03:09 PM
Bread Knives genechapman The Outpost 1 05-04-2002 09:24 AM


All times are GMT -5. The time now is 02:34 AM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved