The Newbies Arena Are you new to knife making? Here is all the help you will need. |
05-31-2020, 04:57 PM
|
Enthusiast
|
|
Join Date: Jul 2012
Posts: 32
|
|
Anvil Brand?
Does anyone have any idea what brand anvil this is? It looks like it has the word SMITHS and a 1 0 1 on it. I’m guessing the 1 0 1 when calculated means 101#’s. Any help would be appreciated.
|
05-31-2020, 05:03 PM
|
Enthusiast
|
|
Join Date: Jul 2012
Posts: 32
|
|
Anvil Brand
Added photos
|
05-31-2020, 07:46 PM
|
|
Founding Member / Moderator
|
|
Join Date: Jun 2002
Location: Wauconda, WA
Posts: 9,844
|
|
I don't know what brand that might be but it looks like a common English style blacksmith's anvil. If it was made in America then the 101 probably does mean 101 lbs. But, if it was made overseas the 101 would likely be decoded as a single hundred weight (112 pounds) plus one additional pound = 113 lbs. If you were to weigh it and see what the actual weight is that might be a clue as to where it was made ....
|
05-31-2020, 11:03 PM
|
Enthusiast
|
|
Join Date: Jul 2012
Posts: 32
|
|
Quote:
Originally Posted by Ray Rogers
I don't know what brand that might be but it looks like a common English style blacksmith's anvil. If it was made in America then the 101 probably does mean 101 lbs. But, if it was made overseas the 101 would likely be decoded as a single hundred weight (112 pounds) plus one additional pound = 113 lbs. If you were to weigh it and see what the actual weight is that might be a clue as to where it was made ....
|
Thanks Ray
|
06-02-2020, 03:25 PM
|
Guru
|
|
Join Date: Jan 2016
Location: Now live in Las Cruces NM.
Posts: 1,345
|
|
I presume it came with that stand? Take a good look and try to find a manufacturer under the rust. You would think a company named Smith would just put Smith on the side with "Made By" on it. Then again look up anvils made by Smith in England. I couldn't find anything on it, nor under a Smith Foundry that made anvils.
|
06-02-2020, 11:30 PM
|
Enthusiast
|
|
Join Date: Jul 2012
Posts: 32
|
|
Anvil
Quote:
Originally Posted by jimmontg
I presume it came with that stand? Take a good look and try to find a manufacturer under the rust. You would think a company named Smith would just put Smith on the side with "Made By" on it. Then again look up anvils made by Smith in England. I couldn't find anything on it, nor under a Smith Foundry that made anvils.
|
Yes the stand came with along with the rust. I tried cleaning it with soap and water and scrub pad. I will try clean off the rust and see what I can find. Thanks
|
06-05-2020, 06:30 AM
|
|
Moderator
|
|
Join Date: Sep 2002
Location: Acworth, GA and/or Hanging Dog, NC
Posts: 3,592
|
|
Just from the pics and it's general profile, plus the stepped base, my first guess would be Peter-Wright. Lot of variables to consider, but you are not going to "devalue" by taking a wire brush to it. These days old anvils in that good a condition bring a bit more than "antique/heirloom" prices. Only thing most buyer's are concerned about are the rebound, deck condition, and any possible cracks and or de-lamination.
Once you've wired it a bit rub a little talcum powder across the surface, most inscriptions will show up no matter how thin or worn.
If not a PW, give a shout our to the ABANA group, plenty of experts over there.
__________________
Carl Rechsteiner, Bladesmith
Georgia Custom Knifemakers Guild, Charter Member
Knifemakers Guild, voting member
Registered Master Artist - GA Council for the Arts
C Rex Custom Knives
Blade Show Table 6-H
|
Tags
|
a, antique, anvil, base, blacksmith, brand, cleaning, common, england, forging, made, photo, powder, profile, show, surface, water |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT -5. The time now is 02:39 PM.
|