WTB - small amount of 15n20

[Bill Vining]

Hi Folks-

I will be going to a local hammer-in soon and I'mm looking for some 15n20 for a damascus billet. I need approximately 12 pieces that are 1" x 6" and anywhere from .050 to .100 thick. If anyone has anything to sell trade etc, please drop me an email.
Thanks

Bill

[Cadillac Forge]

if ya cant find any local-- try Kelly Cupples Steel
509-728-0057

kelly ships quick and cheap
email address- octihunter@charter.net
this may not be an up to date pricelist

15n20

.070, .085, or .095 ....................................3.25

will shear to this range 1 x 4 up to 8 x 48

(.070 x 1 x 48 = 1 lb), (.085 x 1 x 43 = 1 lb), (.095 x 1 x 38 = 1 lb)

Ray Kirk just added it to his site. www.rakerknives.com he has it in 4 or 6 inch length and can cut to the width you need. I just got a shipment yesterday. Check him out. Mike Miller

[EdStreet]

how about bandsaw blades?

Ed

[Mike Turner]

Kelly is the man just like Cadillac said.

[Bill Vining]

Thank you all for the information.
Bill

[Don Hanson]

Originally Posted by BlackNet

how about bandsaw blades?

Ed

Not all bandsaw blades are 15N20 but most of the larger 6" to 12" wide saw mill blades are. I got a bunch of Wood Mizer bands 1'' wide years ago and they wound up being 10XX, no nickel, so no contrast.