MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Tool Time

Tool Time Let's talk shop. Equipment, Tips & Tricks, Safety issues - Post it here.

Reply
 
Thread Tools Display Modes
  #1  
Old 01-17-2018, 01:33 AM
TJuhler TJuhler is offline
Registered
 
Join Date: Jan 2018
Posts: 4
How to sharpen with a Lansky system

Hi guys.

Just made a video about how to get knifes scary sharp with a Lansky sharpening system.

Hope you can use it.

Feel free to leave feedback

https://youtu.be/jSSuziQw6Jo

Last edited by TJuhler; 01-17-2018 at 01:40 AM.
Reply With Quote
  #2  
Old 01-23-2018, 04:14 PM
Wrankin Wrankin is offline
Enthusiast
 
Join Date: Dec 2013
Location: Durham, NC
Posts: 40
A couple observations:

1) You are going entirely too fast and if you keep doing that with your middle and ring fingers below the level of the stone you will cut yourself. Badly. Slow, firm strokes will do a much better job and put a better edge on without removing too much material.

2) Read the comments and look at some of the hundreds of other YouTube videos about sharpening with the Lansky. One of your viewers is spot-on that the last strokes should be into the knife (only) to develop the burr. In my opinion all the strokes should be into the blade. Going back and forth like you do does nothing except remove too much material from the blade.

Good luck and hope this helps,

-b


__________________
-bill rankin
Reply With Quote
Reply

Tags
a, back, blade, edge, how to, knife, made, material, sharp, sharpening, stone, video, videos, youtube


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
How do you sharpen your knives??? dtec1 The Newbies Arena 2 08-06-2016 01:07 PM
Lansky Shapening system Wazukie The Newbies Arena 10 10-24-2013 09:15 PM
Lansky sharpening sistem? Dane Factory Knife & Mid-Tech Discussion 6 06-03-2009 09:31 AM
i just cant sharpen to save myself. Brett Holmes The Newbies Arena 14 11-23-2005 07:07 PM


All times are GMT -5. The time now is 11:30 PM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved