MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Knife Making Discussions > The Newbies Arena

The Newbies Arena Are you new to knife making? Here is all the help you will need.

Reply
 
Thread Tools Display Modes
  #16  
Old 07-16-2016, 02:16 PM
Doug Lester Doug Lester is offline
Hall of Famer
 
Join Date: Sep 2006
Location: Decatur, IL
Posts: 2,556
If you want to work with a wood that seems to get dust everywhere try Osage Orange. Maybe it's just because the bright yellow dust is so visible. I also cut down a bit of the fine sanding dust by using hand tools. Japanese carving files (obtained from Woodcraft) don't seem to put out as much dust plus they give control with only a little loss of speed.

Doug


__________________
If you're not making mistakes then you're not trying hard enough
Reply With Quote
  #17  
Old 07-18-2016, 10:49 AM
jimmontg jimmontg is offline
Guru
 
Join Date: Jan 2016
Location: Now live in Las Cruces NM.
Posts: 1,183
Sheffields Knife Supply has Dymondwood still.

But beware, their online catalogue is messed up after number 5 it jumps to 8 on the price list, but the picture for 6's description is #8, natural oak which they are out of. I have some rio grande applewood which looks natural. It is 21 in the picture, but 23 in the description.They still have many colors left, call and ask. You can't order online you have to call. The lady who owns Sheffield's is elderly and is not going to change at this stage of her life, but that's OK look at some of their prices. Best O1 and D2 prices anywhere (sheared sheet) and many of their products are inexpensive. They have 3/16 loveless bolts which I haven't been able to find anywhere else. I also know where to get 1/8" loveless bolts, a place called Jephco's Knifemakers Hardware. I ordered 30 @ 0.95 ea. brass nuts with stainless screw.

As for working with dymondwood or Pakkawood be sure and use fresh sharp belts as the resin will burn and then it gets nasty smelling.

As for finishing cocobolo, my favorite handle wood btw. I sand it to 600 grit and then mix some 30 minute epoxy and thin with lacquer thinner real thin and paint it on, it soaks in taking some of the epoxy with it and leave overnight and then do it again. I then, after 24 hours of drying, sand 600 to 1200 and polish with some gunstock oil and that finish helps keep the cocobolo from getting dark as time goes by. If I'm in a hurry I just oil and buff with a buff on a drill press at slow speed. But the epoxy does help fill in the grain of the cocobolo and I have a knife with that finish from 1998 and it's still there. Hope I helped somebody.
Reply With Quote
Reply

Tags
bee, blade, buy, carbon, carbon fiber, case, common, easy, g10, grind, handle, handles, ironwood, knife, making, materials, micarta, plastic, post, products, sand, scales, sheath, wood, woods


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Wood For Handles reefera4m The Supply Center 3 01-24-2012 01:06 AM
Wood for Handles JTS The Newbies Arena 11 01-31-2004 11:55 AM
wood handles IronMonkey The Supply Center 0 11-25-2003 01:53 PM
wood handles glaeken Ed Caffrey's Workshop 3 03-28-2003 12:21 PM
Wood for Handles thecrow Fit & Finish 7 12-17-2002 09:42 AM


All times are GMT -5. The time now is 10:25 PM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved