MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Knife Making Discussions > The Newbies Arena

The Newbies Arena Are you new to knife making? Here is all the help you will need.

Reply
 
Thread Tools Display Modes
  #1  
Old 11-01-2022, 10:56 PM
M&J's Avatar
M&J M&J is offline
Skilled
 
Join Date: Dec 2004
Location: So. Cal
Posts: 726
Handle drilling fixture

Most the handle material I use is fairly dimensioned so it made life easy. Had some really odd shapes to drill and clamping them was not yielding the results I wanted.

Made this one up from some 6061 Kaiser alu scrap on hand. Just to note that I really like using their 6061, buying it off the shelf it comes proper size start to finish. At $4.79/pound it is pricey though the remnant job cuts are sold at $2.60/pound. I didn't have any 6-32 screws in the proper length so wound up using these stainless spanner heads. The lower clamp uses 1/4"-20 bolts.

This is for folders and may make up a fixed blade size with some additional refinements.



__________________
Mike
Reply With Quote
  #2  
Old 11-02-2022, 03:05 AM
Doug Lester Doug Lester is offline
Hall of Famer
 
Join Date: Sep 2006
Location: Decatur, IL
Posts: 2,599
Looks interesting. Not being a folding knife maker I don't quite see how it would be used but I applaud anyone who makes their own tools.

Doug


__________________
If you're not making mistakes then you're not trying hard enough
Reply With Quote
  #3  
Old 11-02-2022, 02:59 PM
M&J's Avatar
M&J M&J is offline
Skilled
 
Join Date: Dec 2004
Location: So. Cal
Posts: 726
This was motivated by some stag slabs that were to be drilled for a folder body. I've done variants hanging off the drill press table but it wasn't as secure to drill that way. The flat of the folder body faces up and the odd material is below so that this results in an accurate perpendicular hole that lines up to the body or tang of the knife.

Clamps can slip so this way the lower shelf clamp is held by 1/4"-20 bolts and the thumb knobs to tighten the work piece. It weighs in at 15.8 oz. so enough mass to be steady-stabil when drilling.

The lower shelf isnot as wide as the top by .50" so that I can add supplemental clamping if necessary. The smaller 1" Kant Twist cantilever clamps if necessary fit that space easily.





__________________
Mike

Last edited by M&J; 11-02-2022 at 03:05 PM.
Reply With Quote
Reply

Tags
a, art, blade, drill, easy, finish, fixed, fixed blade, folder, folding, folding knife, handle, handle material, hunting knife, interesting, knife, knives, made, make, material, screws, stainless, tang, tools


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Drilling holes in handle eto The Newbies Arena 4 10-26-2015 05:37 PM
Easy Hawk Handle Drilling Guide Gene Chapman The Outpost 4 07-23-2007 07:27 PM
Pipe hawk handle drilling fixture B.Finnigan Tool Time 2 07-20-2007 05:39 PM
Handle drilling jig Sweany Tool Time 2 02-05-2004 06:44 PM
Hidden tang knife handle drilling method MaxTheKnife The Outpost 13 05-21-2001 04:59 PM


All times are GMT -5. The time now is 09:36 AM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved