|
|
Register | All Photos | FAQ | Members List | Calendar | ShopStream (Radio/TV) | Search | Today's Posts | Mark Forums Read |
Ed Caffrey's Workshop Talk to Ed Caffrey ... The Montana Bladesmith! Tips, tricks and more from an ABS Mastersmith. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
They are on their way, Ed!
Ed, I finally got to go to the post office, so the 2 blades are on their way out to you via priority mail! |
#2
|
|||
|
|||
Blades on the way!
Cool Beans!! Now as long as the pony express doesn't get lost, and I don't destroy them in the heat treat, and they make is back to you OK...........Nervous yet? : |
#3
|
|||
|
|||
DOH!!!! Don't say that!! I won't sleep for a week now!!! They should be fine...hopefully. And Daryl has some more pieces, so I can get more if it goes ping or crack |
#4
|
|||
|
|||
Did the pony Express show up yet, Ed??? |
#5
|
|||
|
|||
on the way
Taz, Nothing yet! You gotta remember.....you sent them to Montana! About the only thing that is fast here is the wind! If they come tomorrow, it will be Monday before I can do them. Got Guard Drill this weekend.....and that means very long days for me. But rest assured....they will get done. |
#6
|
|||
|
|||
blades
Taz! They arrived last eveing. I've got to work all weekend, so I'll likely get started Monday eveing on the them. It will be three days to harden, and another couple to temper. So look for them to be headed back your way around the 12th. |
#7
|
|||
|
|||
Great Ed! Glad to see the pony got there ok! |
#8
|
|||
|
|||
Are they behaving, Ed??? |
#9
|
|||
|
|||
So far so good! (Except for the delamination on the spine of one, and the edge of the other, and the corkscrew warpage.......) HA HA! Just kidding, they're fine. :evil: They've had their last hardening cycle, and will go into temper tomorrow evening for the first time. Should have them headed back to you no later than tuesday. |
#10
|
|||
|
|||
Great!! |
Tags |
blade, knife |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
(View-All) Members who have read this thread : 1 | |
lsknives |
Thread Tools | |
Display Modes | |
|
|