MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Ed Caffrey's Workshop

Ed Caffrey's Workshop Talk to Ed Caffrey ... The Montana Bladesmith! Tips, tricks and more from an ABS Mastersmith.

Reply
 
Thread Tools Display Modes
  #1  
Old 09-18-2014, 12:54 PM
J. Doyle's Avatar
J. Doyle J. Doyle is offline
Skilled
 
Join Date: Jan 2010
Location: Gladwin, MI
Posts: 337
S-guard Bowie- Bronze and textured redwood burl

Here's a nice medium sized bowie I just finished today. All comments, critique, discussion and/or opinions welcome. I particularly like the 'ghost' hamon above the main transition line. Also, how the figure and color changes in the redwood are still visible through the texturing.

Specs:
Hand forged from 1075 steel, clay quenched and etched
13" overall, 8" blade, .225" thick at the ricasso
Radical distal taper, clip is just shy of sharp
Bronze guard and spacer
Stabilized Redwood burl, sculpted, carved and textured
Checkered stainless steel finial nut













__________________
John Doyle

You have nothing to fear but fear itself...........and bears.
Reply With Quote
  #2  
Old 09-18-2014, 05:03 PM
Jon Kelly Jon Kelly is offline
Member
 
Join Date: Dec 2013
Location: Montana, USA
Posts: 21
That is very spectacular Mr. Doyle. I am not so familiar with bronze, does it patina over time if left uncoated or infrequently polished? The only suggestion I could possibly make would be to perhaps fabricate a tang nut out of bronze in order to pull it all together.
Reply With Quote
  #3  
Old 09-18-2014, 05:24 PM
J. Doyle's Avatar
J. Doyle J. Doyle is offline
Skilled
 
Join Date: Jan 2010
Location: Gladwin, MI
Posts: 337
Thanks Jon.

Yeah, bronze takes a nice penny brown patina over time. None of that green crap you get with brass though.

The problem with the bronze finial nut is that I can't find any bronze that matches. I've got bronze round stock but it's a drastically different color than the flat stock I have for guards. I have at least two kinds of bronze round and neither one matches the flat.

I used to use it anyway and people complained that it didn't match. My personal rule is, if something like that doesn't match, then it's better to do with a contrasting material altogether.


__________________
John Doyle

You have nothing to fear but fear itself...........and bears.
Reply With Quote
  #4  
Old 09-18-2014, 09:40 PM
ericbrinkerhoff's Avatar
ericbrinkerhoff ericbrinkerhoff is offline
Steel Addict
 
Join Date: Mar 2013
Location: P.O.B.20 East Dover,VT 05341
Posts: 131
Elegant!!
Reply With Quote
  #5  
Old 09-19-2014, 11:31 AM
J. Doyle's Avatar
J. Doyle J. Doyle is offline
Skilled
 
Join Date: Jan 2010
Location: Gladwin, MI
Posts: 337
Due to the majority of the the feedback I've gotten on this, I've gone back and made a new bronze finial to match the fittings. I ended up machining one out of a block of the same material as the spacer. I do think it looks better. I guess I could have done that right from the get go, but it was easier to make a finial out of already round stock vs flat sheet. But the people have spoken and therefore........new finial.



__________________
John Doyle

You have nothing to fear but fear itself...........and bears.
Reply With Quote
  #6  
Old 09-20-2014, 10:50 AM
Naboyle's Avatar
Naboyle Naboyle is offline
Steel Addict
 
Join Date: Dec 2012
Location: New Florence, Pennsylvania.
Posts: 263
Very beautiful John! One question thou, how do you get your texturing to look like that? I've tried it with a small burr in my dremel on some scrap wood but it always ends up looking like I just took a dremel with a burr and made a mess on a scrap piece of wood!!!
Reply With Quote
  #7  
Old 09-24-2014, 11:10 AM
Dana Hackney's Avatar
Dana Hackney Dana Hackney is offline
Skilled
 
Join Date: Feb 2006
Location: Bonners Ferry, ID
Posts: 537
Beautiful work, John!

It's been waaaaay too long since my last visit here. We are about a month out of having the house done! The shop is almost ready to move into, as well. Gosh, what a loooooooong process for a small house!

Cheers to all here! Hope to be back here with comments and questions in about a month.

Take care,
Dana
Reply With Quote
  #8  
Old 09-24-2014, 10:21 PM
jim poling's Avatar
jim poling jim poling is offline
Steel Addict
 
Join Date: Jul 2008
Location: Alvarado MN
Posts: 296
Very Nice John!


__________________
Jim P. Poling
ABS Journeyman Smith
www.irontraditions.com
Reply With Quote
  #9  
Old 09-26-2014, 11:22 AM
J. Doyle's Avatar
J. Doyle J. Doyle is offline
Skilled
 
Join Date: Jan 2010
Location: Gladwin, MI
Posts: 337
Thanks again guys.


__________________
John Doyle

You have nothing to fear but fear itself...........and bears.
Reply With Quote
  #10  
Old 09-28-2014, 04:42 PM
Ed Caffrey's Avatar
Ed Caffrey Ed Caffrey is offline
Super Moderator
 
Join Date: Jun 2002
Location: Great Falls, Montana, USA
Posts: 4,393
Send a message via AIM to Ed Caffrey Send a message via Yahoo to Ed Caffrey
Getting in late on this one....Cindy and I just got home from a cross country trip to KY. 4,000 miles in 9 days (yes, my butt is still sore)

NICE work John! Love the overall "flow". When I read that you carved/textured redwood burl.....all I could think was "bet John was saying a few choice words". In my experience redwood burl is one of the more difficult woods to carve/texture......but you did a super job.


__________________
WWW.CAFFREYKNIVES.NET

Caffreyknives@gmail.com

"Every CHOICE has a CONSEQUENCE, and all your CONSEQUENCES are a result of your CHOICES."
Reply With Quote
  #11  
Old 09-28-2014, 06:51 PM
J. Doyle's Avatar
J. Doyle J. Doyle is offline
Skilled
 
Join Date: Jan 2010
Location: Gladwin, MI
Posts: 337
Thanks for the kind words Ed. I really appreciate it.

And..............you hit the nail right on the head with the redwood. I learned a couple things on this knife that I won't do again and texturing redwood is absolutely one of them.

Where was your input BEFORE I started the texturing?

I found it to be very inconsistent with super soft areas marbled in with much harder areas, making it quite tedious to get an even consistent depth to the texture.

I can normally texture blackwood in about 45 minutes per side maybe. This probably took me at least 2 hours per side. Not cool.

I'm happy with how it came out but it will certainly be a 'one-of-a-kind' handle from me.

Glad you made it home safe and sound by the way. I don't know about those long car rides anymore. Seems about 5 hours is my max these days.


__________________
John Doyle

You have nothing to fear but fear itself...........and bears.
Reply With Quote
  #12  
Old 10-05-2014, 07:34 AM
jim poling's Avatar
jim poling jim poling is offline
Steel Addict
 
Join Date: Jul 2008
Location: Alvarado MN
Posts: 296
Very nice John, looks great!


__________________
Jim P. Poling
ABS Journeyman Smith
www.irontraditions.com
Reply With Quote
Reply

Tags
bee, blade, block, bowie, brass, burl, carved, flat, forged, guard, guards, hamon, knife, made, make, material, problem, quenched, spacer, stainless, stainless steel, steel, tang, tang nut, wood


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Chainsaw and Redwood Burl prizzim The Outpost 5 02-23-2012 11:18 AM
Carved/Textured blackwood and bronze.. J. Doyle Ed Caffrey's Workshop 5 12-26-2011 12:46 PM
Damascus and redwood burl J.Lec The Newbies Arena 7 05-27-2011 02:59 PM
Damascus and redwood burl J.Lec The Damascus Forum 0 05-23-2011 06:12 PM


All times are GMT -5. The time now is 09:49 PM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved