Big Bad & Blue.....sorry that's the best I could come up with
Here's another chopper I recently finished, I forged it from 2'' x 1/4'' "NEW" 5160 flat stock. Which was 3x's hardened and 2x's tempered.
The handle is a black & blue paper micarta , and was actually made by a forum member, I just cant remember who?? feel free to speak up
So the specs are 18'' O.A., with a blade thats about 12 1/2'' tip to plunge cut. The blade is flat ground and has a slight convexed edge. The spine has a long clip ground in, it isnt very sharp, but it could be sharpened if someone chose to do so.
The finish is bead blasted, and the scales are polished. Pins are nickle.
I dont use this type of handle material much anymore, though I use to. I see it alot, but to truely get it right both sides should have an identical pattern, which can sometimes be tricky. I think I got them pretty close on this one.
Before finishing I did alot of chopping with this'en, and let me say it was very impressive, when it came to hacking through heavy vines, and brush.
Price is $275 shipped
thanks
Andrew