MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Tool Time

Tool Time Let's talk shop. Equipment, Tips & Tricks, Safety issues - Post it here.

Reply
 
Thread Tools Display Modes
  #1  
Old 11-19-2009, 09:22 PM
SHostetler SHostetler is offline
Enthusiast
 
Join Date: Oct 2005
Location: Parks, AZ
Posts: 58
Gorton Pantograph

Question for those knowledgable about pantographs........
I have a chance to pick up a Gorton 3U pantograph that looks to be in good shape. Are these suitable for making interframe folders? Any points to be on the lookout for? Are parts such as collets, cutters, etc readily available? Or should I forget the pantograph and do the interframe manually?

Any info is greatly appreciated.

Thanks,
Steve Hostetler
Reply With Quote
  #2  
Old 11-19-2009, 11:56 PM
Ed Tipton Ed Tipton is offline
Skilled
 
Join Date: Apr 2009
Posts: 352
Steve,
I used to work at Mueller Valve in Decatur, Illinois as a machinist. We had two Gorton Pantagraph machines that were used to cut the "O" ring grooves inside the valve body. Both machines were excellent as far as holding tolerance and they were hardly ever down for maintenance. The problem with them was the set-up. I ran them both for several years, and admittedly, they were almost always set-up to run the same valve bodies, but on the few occassions where we did change them they were an absolute BEAR to set up. Because Gorton machines were generally held in high regard, I purchased an I22 Gorton Mastermill for my own use in my shop. It has been a good machine and has never required any maintenance from me although I don't use it very often. I also have a Gorton tool grinding machine, and it is also an excellent machine. My mill does use B&S tapered collets, and they are relatively expensive and can be hard to find, but not all Gorton mills use the B&S collet system. If the machine is in good condition and there is some tooling with it, it could be a good buy if the price is right, and I doubt that a Pantagraph machine would be worn out. Chances are good that it was used for one job and one job only, so even if it is worn, it may work as new if you change the set-up. If you decide to buy it, I suggest you try and get the manuals for the machine. Trying to set up a Gorton without the manual will test even an old machinist. Did I mention that they can be VERY DIFFICULT to set up????
Reply With Quote
  #3  
Old 04-28-2019, 01:47 PM
torchart torchart is offline
Member
 
Join Date: Jan 2012
Location: Rotan Texas
Posts: 25
I have a Gorton Pantograph I use to engrave names on the knives I build. it works great. Its impossible to find pre made cutting tools for it. and I dont have a machine to make them my self. If you know where I can find these, let me know.
Reply With Quote
Reply

Tags
build, ca, cutting, forge, knives, made, make, tools


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 03:30 AM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved