Hi Steve,
Here are the hunters I've been working on. they are all in AST-34.
http://www.knifenetwork.com/forum/pi...pictureid=2370
http://www.knifenetwork.com/forum/pi...pictureid=2364
Above is a 3.75" Drop Point with Black Linen Micarta / Stainless guard etc. I did this for my Father as he liked the first knife so much he wanted one just like it for himself. I'm working on a sheath for it, as you can probably tell, it's not quite finished yet, wow this is a steep learning curve!
http://www.knifenetwork.com/forum/pi...pictureid=2369
http://www.knifenetwork.com/forum/pi...pictureid=2363
Above is a 5" Utility in the same materials, this i think is my favorite so far.
http://www.knifenetwork.com/forum/pi...pictureid=2367
http://www.knifenetwork.com/forum/pi...pictureid=2368
Above is a 3.75" Semi Skinner with Green Canvas Micarta.
What an evolving learning experience this is. every step of the process there is a new skill to learn or piece of equipment to build. My current challenge is getting consistency with my home built electro-etcher. At least I won't loose my tools now with all the practice I've had.
More to come!
Cheers,
Steve