Thread: anvils
View Single Post
  #9  
Old 01-31-2017, 07:26 AM
jimmontg jimmontg is offline
Guru
 
Join Date: Jan 2016
Location: Now live in Las Cruces NM.
Posts: 1,345
Crex is right 1/2" isn't going to cut it and may not be very hard anyway. Try a recycling yard as well as a scrap yard. Go to a machine shop and see if they have a "cutoff" about 1' thick or better about 4-6" square or round. Almost everyone will have a piece like that in their scrap barrel.
Reply With Quote