View Single Post
  #1  
Old 03-10-2019, 12:42 AM
JF-Knives's Avatar
JF-Knives JF-Knives is offline
 
Join Date: Apr 2015
Location: The Netherlands
Posts: 9
Made a new (small) belt grinder...

I don't know if this is the right place to post it, but I made a new small belt grinder. I made it especially for making or modifying small parts. Here are the spec's:

- Machine tilting to any angle between 0 and 90 degrees.
- Forwards and backwards working.
- Variable speed from 0 till 10000 rpm.
- Digital speed control of the motor.
- Tool tilting from -90 till +90 degrees.
- Quick tool change.
- Quick sanding plate change.
- Belts of different length usable .
- Adjustable belt tensioning.
- Sanding plate tilting.
- Big sanding wheel.
- Sanding plate in the shape of the wheels.
- High power dc motor. (One phase, great power)
- Completely build with aluminum.
- No chinese bearings.
- Easy disassemble for repair or maintenance.
- Belt sizes: 13 - 15mm wide and 456 - 533mm long (strip sander belts)
- payable.

What do you guy's think of this design ?









https://www.youtube.com/watch?v=BtNjHNQyQ9I&t=16s

https://www.youtube.com/watch?v=-PqOAqIKlCE&t=1s

w.b.r.
Joost
Reply With Quote