|
Yeh from what I know those "pivot screws" are used on a folder as a pivot (hence the name) yeh you could use them as screw to hold scales to a tang but its going to take some fidleing to get the length right where there are other screws that are really ment to put scales on a tang that would be much much easier to use and you will still be able to remove the scales later some have been listed above like the JP bolts...you may have luck using those pivot screws but most likely it will give you more of a headache than they are worth when you can do the exact same thing much eaiser with other fasteners. I have been making knives for a couple years now never once have I used a pivot screw on anything but a folder. Because really ther is no reason to makes things harder than it needs to be, but yes it can be done
|