|
Oh also this is VERY important when using gator belts I use them all the time but I start with a 60 grit ceramic then go to a 120 bluefire , then when I start with the gators I start at 120 then 180 then 240 then 400 and maybe 600...as people have mentioned these belts don't remove much material I ONLY use them when I use all of them I wont use some gators some Norton and some hermes (except the original grind like I described abouve) since these belts don't remove much material if you have a high and low spot even if its very slight you will know it right away.
|