|
I swear by AcraGlas as well and it was Ed's advice that pointed me in that direction. The easy way - and I'm lazy so the easy way is always my goal and better still if it is cheap - is to use veterinary syringes. You can get them in feed stores and probably in some of the larger pet shops or on eBay. They come in different sizes and you don't need to buy needles, just the syringe and they are cheap. Use one for the hardener and one for the epoxy part, its easy to measure 4:1 that way. After using them, suck up some Acetone with them and squirt it back out several times (its re-usable) and the syringes will last for a long time.....
|