View Single Post
  #53  
Old 05-01-2011, 06:21 PM
ARCustomKnives's Avatar
ARCustomKnives ARCustomKnives is offline
Skilled
 
Join Date: Dec 2008
Location: Valparaiso, IN
Posts: 412

So far I have both outside liners, the inside liner/spacer, and the two blades profiled.

I also went head and put a rough grind on both blades so that thay are just about ready for heat treat. I still need to profile the back springs. This would be a whole lot easier if I had a metal cutting bandsaw and a horizontal grinder... hahaha

My biggest issue is finding the time to work on this at all, since I'm in the middle of working a 10 day straight rotation at work. That, and my wife is 10 weeks pregnant with twins, so this may take me a while! hahah


__________________
-Andrew Riley

For the word of God is living and active and sharper than any two-edged sword.... (Hebrews 4:12)

My YouTube Channel: www.YouTube.com/ARCustomKnives
Check it out and Subscribe!