|
All 4 ATS-34 blades 1/8" thick came out dead straight. I Hollowed the tangs leaving some full thickness spots at the butt, roughed out the bevels leaving .050" at the edge and plate quenched. Perfect result!
Thanks jess4e for the tip on straightening within a few mins. I never even thought to do that before. A 5/32" 440C blade with a tapered tang came out a bit bent so i just straightened it with hand pressure and it was almost down to room temp. It unfortunately assumed it's original shape after the first temper, but was easy fixed in the second. May have to clamp them straight for the temper next time...
|