Okay the picture taking God's were not with me for this one. No matter what I did it just wasn't gonna work out.
Steel: ATS-34 Hand Rubbed (1200 grit finish)
Blade Length: 4 5/8" from end of guard
Overall: 9 3/8"
Guard: 416SS
Handle: Stabilized Juniper Burl
Pin: 5/32" Mosaic pin
This knife is very light, used 1/8" stock. There are also thumb serrations on the spine just in front of the guard.
Thanks for looking. Haven't figured out a name for this one yet, so if anything jumps out at ya please let me know.
Sean