View Single Post
  #5  
Old 10-25-2019, 11:44 PM
jimmontg jimmontg is offline
Guru
 
Join Date: Jan 2016
Location: Now live in Las Cruces NM.
Posts: 1,251
I can't add much to what Steve M said

Except to agree with him about putting a radius on the edge of you grinding wheel, you don't want to do that. If you want your plunge cut to be radiused hang the belt about an 1/8 inch off the edge of the wheel by adjusting your belt off center with your belt alignment knob or screw and use a flex belt. My grinders have a screw on one and a knob on the other to adjust my belts.
Reply With Quote