soup up your personalizer
I planned on building Bob Warners electro etch unit. I had a personalizer but wanted a deeper etch and better marking.
I thought maybe I could modify the personalizer so I took of the cover and it was almost the same as Bobs schematics,
I bought the transformer that Bob recommends for his unit. It fit with only drilling out 1 hole a little larger.The trans was a 25.2 volt 2 amp model. I wired it up and had to redo the led as on Bobs plans. I have 25.5 volts dc and 24.5 volts ac.
I tried a logo etch and mark and it came out great.
Put the machine on etch(dc). switch off. Switch on 123 off 456 on 789 off 10 11 12 on 13 14 15 off switch to mark on 1234567 off great mark.
Cost $9.99 + tax
My $.02
Take Care
TJ
__________________
TJ Smith
Knifemaker
|