Thread: epoxy question
View Single Post
  #7  
Old 07-13-2017, 01:19 AM
jimmontg jimmontg is offline
Guru
 
Join Date: Jan 2016
Location: Now live in Las Cruces NM.
Posts: 1,345
Also Drover, if you can keep it hidden JB Weld is a 600 degree epoxy, but is a dark grey/black color. Cleans up before hardening with lacquer thinner. I use it for hidden tangs and for glueing brass as regular epoxy doesn't stick to it well. I have used it on a full tang and it left a nice line around the tang.

Last edited by jimmontg; 07-13-2017 at 01:23 AM.
Reply With Quote