|
The handle IS still on my HF porta. Just can't see it from that angle. I drilled three holes on the long
side and two in the bottom to fix the porta to the mount I made. I used "U" shaped bracket irons and
fastened everything with nuts, bolts, and L brackets.
It's not the prettiest thing but it is sturdy and does the job well for my needs. As Crex stated, do NOT go
cheap on your blades. HF porta is not the best brand and is very noisy but with good blades, it does a
decent job for a hobby maker.
If you want more pixs of my unit, I will be glad to take better pixs and show how I did mine.
Troy
|