View Single Post
Old 09-25-2018, 02:29 PM
KNAdmin's Avatar
KNAdmin KNAdmin is offline
Join Date: Jun 2002
Posts: 2,121
Looks great, Mike!

One of the biggest parts of the KYDEX® learning curve is figuring out how long to leave your material in the oven to get it just right for forming. We recommend a using an inexpensive laser thermometer for sampling the surface temp. But you can also place some of your material over the edge of the rack and watch for it to start drooping over the side once it starts getting up to forming temperature. The recommended temperature range is 300-325 degrees F. But you may like to work with it slightly warmer or cooler. It's really a personal thing.

Alex Whetsell

Atlanta NOC
Reply With Quote