Strips of 15N20 for sale. The pieces are cut 1 1/2 inches wide. They are 0.078 inch thick. Lengths are 6 inch, 7 inch, 8 inch, and 9 inch. The steel is annealed. The "gullet" or "clip" is still on the pieces but the measurements are for full width and length.
I have used this steel for damascus making for many years. I'm out of the Damascus making business now.
Prices are as follows:
6 inch pieces...........50 cents each
7 inch pieces...........75 cents each
8 inch pieces........1.00 each
9 inch pieces........1.25 each
Shipping is extra but not that bad in flat rate boxes.
Contact:
raymond@damascusknife.com
You can see this steel in Damascus I have made at:
http://www.damascusknife.com