Thread: anvil stump
View Single Post
  #1  
Old 07-24-2020, 03:16 AM
loneronin's Avatar
loneronin loneronin is offline
Enthusiast
 
Join Date: Aug 2007
Location: Turin, Italy
Posts: 35
anvil stump

the original stump of my anvil was too big in diameter. uncomfortable to move and above all it did not allow me to be as near to the anvil as I like except by placing the anvil itself on the edge of it rather than in the center. so I decided to put it aside for now and use the old stump of my "ASO". I took two pieces of pallet frame and cut them copying the shape of the base of the anvil obtaining two stop blocks which I nailed to the center of the new stump. now I can move it more easily and can get closer to the anvil when I forge. it is perfectly stable and the anvil cannot move at all.

if you are interested here is the link to the video:
https://youtu.be/NHkdosG3-ZQ

Attached Images
File Type: jpg anvil stump thumb YT_800x409.jpg (178.5 KB, 5 views)
Reply With Quote